What happened to your Discovery 2 today?

The WABCO SRD000150 arrived from the USA. About AU$100, delivered. I have changed the hub, (twice) I have a loom overlay and now the ECU. This will get rid of the Three Amigos, I hope!
Edit, what else can I try? Earths are good.

Quote:

---

Originally Posted by Werdenfelser

Which arch tank have you installed? May i ask you about some pictures how it looks and how its done?
TIA!

---

Hopefully I can attach some photos, but basically the sill tank sits flush with the side step (tucks up under the chassis) the rear tank hangs down a bit at the rear about 150mm or so (no photos of instalation)

To fill I installed a 2" Tee with a 25mm leg, this drops into the rear tank, from there I have an in tank pump (high volume, low pressure) that pumps to the sill tank. I have a little "clacker" external pump to pump back to the factory tank, this feeds in at the rubber filler pipe just before the tank neck. The sill tanl is vented back to the rear tank and the rear tank vents into the factory vent line (3/4")
I have setup switches and gauges above the mirror (where the sunroof controls are/would be?) a master switch and 2 tank pimp switches.

I will get more photos once I'm home again

Cheers

Redd

Here are a couple pics of the oil cooler I have just replaced, it looks and feels (weight) excatly the same as the original (which was pretty crusty and had been sitting for about 5-6 years) the white bucket is actually what was drained out of the cooling system!!!! The new cooler cost $56 delivered so not complaining

Cheers

Redd

Attachment 196049Attachment 196050Attachment 196051Attachment 196052Attachment 196053Attachment 196054Attachment 196055