Thread: Auto Trans Output

Hi
I have seached here and on the web looking for infomation on the D2 Td5 2001 Auto Transmission. I decided to replace failed cooler hose to steel pipe crimp connection by welding JIC hydraulic fittings to the steel pipes. I am fitting a higher spec cooler and have not noted where pipes were originally connected.
Rave lists the pipe closest the temp switch as being the AT output is this the top pipe or bottom pipe going into the transmission?
The output will be connected to the bottom connection of the cooler.
Thanks Ollie

Thanks Woko

Hi Pedro
I wanted to get away from the original crimps One was leaking and one very close to coming off, The steel well on fittings could not be welded to the original aluminium cooler. I will post photos soon
Regards applied