Thread: Brisbane to Perth - Questions from the road

Hi all.

We're about 5000 km into a half lap, Brisbane to Perth via Tassie.

I've struck a few questions along the way that I'd like to ask your collective help with. Mobile reception and daily trek / camp duties make it difficult to find time to google / search the forum.

I hope I'm not imposing too much if I ask for some help with forum or other links links to info.

Here's my first (scenario then) question:

Sitrep: Had to change an SLS airbag in the field. Bent a kangaroo jack doing it (that's for a separate thread perhaps). The SLS / SLABS went a bit weird afterwards and wouldn't inflate the new bag. I was suss on the left height sensor (the side I changed), so I manually entered new target heights via Nanocom Evo - at a best guess based on current height. After a drive, overnight stop, then check the SLS seems to be working as expected again. I evened out the left and right sides and both are now set to 130 target height in the nanocom.

Q: what are the default/factory/recommended target heights for rear left / right SLS as viewed via Nanocom Evo?

Thanks all.

Wil.

Originally Posted by simonmelb

Hi Wil,



Don't know as it's too late to go and check mine, but this thread and the link in it should help: http://www.aulro.com/afvb/discovery-...ls-height.html

Thanks Simon! Just what I needed! I really appreciate the link!