Reply With QuoteYou could try Mario's repair trick from this thread.
Instrument binnacle repair tip
Otherwise the new part's price is rather eyewatering close to $500!
Cheers
Steve
Does anyone know where you can get a replacement binnacle for the drivers side of a d2? Every parts place has the same issue with them being cracked and broken.
I'm considering ordering a run of re-made ones from china at this rate...
Wizard
You could try Mario's repair trick from this thread.
Instrument binnacle repair tip
Otherwise the new part's price is rather eyewatering close to $500!
Cheers
Steve
I wish mine broke like that! Ive got a huge split right down the middle no luck with glue so far. If i get enough interest i might get some made up aftermarket in china.
Originally Posted by Rok_Dr
YarnMaster
Subscriber
Not even with Rapid Fix?
D2a Td5 Manual, Chawton White. aka "Daisy"
Build date 11th Oct 2003
Freelander 2 2011, manual, the daughter calls it Perri
Before I had a Land Rover I did not have any torque wrenches. Now I have three.
LROCV #1410
its a pretty big crack. so far everytime i take it off road it rattles the crack open again. Considering trying to use some shim steel backing and try gluing it again
AT RESTI have repaired a cracked console ( where the gesr lever is) with skinning the inside with fiberglass cloth and resin , held for 5 years and still held when I sold it.
Thats a good idea i might give that a crack (no pun intended).
Wizard
You can try getting some aluminium fly mesh and melting that into the plastic with a soldering iron to hold the two plastic sides together. Use a fan to push the fumes away from you though.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks