Nanocom fault: 3 amigos

Quote:

---

Originally Posted by biggin

....
Johntins, I now realise why sierrafery didn't think you could repair the modulators. The amount of epoxy they poured into these things makes the internals inaccessible.

---

I was hoping that you'll be more handy than me and contradict me cos i'm not the best with mechanics and failed to limb in pieces the spare i have [wink11]

Quote:

---

Originally Posted by biggin

It's times like these I wish I knew how to multi-quote.

Johntins, I now realise why sierrafery didn't think you could repair the modulators. The amount of epoxy they poured into these things makes the internals inaccessible.

---

Darn.

Quote:

---

Originally Posted by biggin

It's times like these I wish I knew

---

Quote:

---

Originally Posted by biggin

how to

---

Quote:

---

Originally Posted by biggin

multi-quote.

---

Like this?

Very clever. How'd you do that?
I'd be quite prepared to have a go at a dodgy modulator if I could get my hands on one, but I'm not prepared to butcher my own unless I know for sure that it's U/S.

Quote:

---

Originally Posted by biggin

Very clever. How'd you do that?

---

It's easy. Just copy and paste the bit's in [ ]. So, if I copy and past the bit that says QUOTE=biggin;2684041 Including the brackets

Quote:

---

Originally Posted by biggin

and include the bit I want to quote, and then copy the /QUOTE bit, including the brackets and paste it at the end

---

I get this. Just do it for each bit you want to insert.

You can cut and paste from another thread as well.

Quote:

---

Originally Posted by johntins

Make sure Mario and Heather know you are Aulro. They will look after you. their service is exemplary.

---

Quote:

---

Originally Posted by johntins

It's easy. Just copy and paste the bit's in [ ]. So, if I copy and past the bit that says QUOTE=biggin;2684041 Including the brackets



I get this. Just do it for each bit you want to insert.

You can cut and paste from another thread as well.

---

I hope that made sense.

[QUOTE=johntins;2684043]It's easy. Just copy and paste the bit's in [ ]. So, if I copy and past the bit that says QUOTE=biggin;2684041 Including the brackets

The wife wont let me copy and paste anymore because it take her forever to get the glue off the monitor screen.

[QUOTE=whitey56;2684105]

Quote:

---

Originally Posted by johntins

It's easy. Just copy and paste the bit's in [ ]. So, if I copy and past the bit that says QUOTE=biggin;2684041 Including the brackets

The wife wont let me copy and paste anymore because it take her forever to get the glue off the monitor screen.

---

:Rolling::Rolling::Rolling:

Quote:

---

Originally Posted by johntins

I hope that made sense.

---

I hoped it would too.
Unfortunately, not.

At the bottom RH corner of every reply is a symbol for quoting with a + symbol too .. right next to the reply with quote shortcut and to the right of it.

Quote:

---

Originally Posted by johntins

I hope that made sense.

---

It did .... but is the long way around(which can sometimes be a good thing .. I like the 'long way around'

Quote:

---

Originally Posted by biggin

I hoped it would too.
Unfortunately, not.

---

If you click on each one of those + symbols, they become highlighted in blue(or something like that) .. this now means they're active.

On the last of the multiple replies that you want to quote you only need to click that 'reply with quote' icon. As long as multiple + symbols are active(blue) .. they all appear on your reply screen.
Obviously move your line cursor between each quoted section to reply to individual quotes.