New Allisport transmission cooler

Gents here is some information for you...

Using the photo above and crawling under the Disco this is the bung used, see orange circle.
It is an M14 1.5 thread.... see my post in What happened to your Disco today for further results...
Cheers DDM

Attachment 131011

For the lazy https://www.aulro.com/afvb/discovery...ml#post2731424

(soz about the reviving ancient thread but it's also what comes up when you start searching for sticking a temp sensor in a zf box).

Quote:

---

Originally Posted by twr7cx

No, I would have done it on any random day and just aimed to be as fast as possible and top the fluid up afterwards.



I used a knife to enlarge the opening - I currently have a 8 gauge power cable, two UHF antenna cables, MadMan wiring and more fitting through there, so it can be done.

---

If you pull the sound proofing back there is another bung under that one that you can put through another complete wiring harness, only found it by accident when replacing speed sensor wiring. near brake booster well hidden as someone else has pointed out.

Quote:

---

Originally Posted by John_D4

TRS are doing a P38 trans cooler as a kit for the D2. They say that after fitting the P38 cooler that they haven't had any issues with trans temps. By memory it was about $300

---

They are - I was the instigator on my D2 years ago.