Radiator issue

Quote:

---

Originally Posted by willowsdisco

The bottom of the two small hoses comes from the fuel cooler , it is restricted to about 2 mm . The top hose is blanked off as if it needs to be drilled out ...can't see where the hose goes to

---

They are deliberately blocked off on update rads. see bulletin posted by bob10 and read the note about not opening them,

Thanks very much guys...that was exactly what I needed to know [bigsmile1]

What is the difference between part number PDK000080 (Without ECD3) and PCC001070 (With ECD3)?

The technical bulletin seems to indicate that PDK000080 has the same connections/layout as PCC001070. Or am I missing something?

Quote:

---

Originally Posted by kelvo

What is the difference between part number PDK000080 (Without ECD3) and PCC001070 (With ECD3)?

The technical bulletin seems to indicate that PDK000080 has the same connections/layout as PCC001070. Or am I missing something?

---

Same connections , but the updated ones have a restriction and a block off. If you fit the newer version radiator you still attach all your hoses, the one that's blocked off still gives you somewhere to hang your hose off.

Quote:

---

Originally Posted by Roverlord off road spares

Same connections , but the updated ones have a restriction and a block off. If you fit the newer version radiator you still attach all your hoses, the one that's blocked off still gives you somewhere to hang your hose off.

---

I'm led to believe that the hose that connected to the top spigot can be disposed of, and you blank off the outlet from the oil cooler. [ secret hose]