Have you had a good look underneath the truck?
My ARB bar has plenty of room to remove the winch, So I imagine that TJM would also make allowances in the design of their winch bars to allow removal of the winch for servicing as well.
Hi all, I'm going to swap the winch on my 2002 D2 with a tjm bar on it. Now it looks like i have to drop the bar to do so. Could one of y'all confirm this?
Cheers Brett
Have you had a good look underneath the truck?
My ARB bar has plenty of room to remove the winch, So I imagine that TJM would also make allowances in the design of their winch bars to allow removal of the winch for servicing as well.
You only get one shot at life, Aim well
2004 D2 "S" V8 auto, with a few Mods gone
2007 79 Series Landcruiser V8 Ute, With a few Mods.
4.6m Quintrex boat
20' Jayco Expanda caravan gone
Depends how its mounted, on my d1 it's upside down on a cradle so will drop straight down.
MY08 TDV6 SE D3- permagrin ooh yeah
2004 Jayco Freedom tin tent
1998 Triumph Daytona T595
1974 VW Kombi bus
1958 Holden FC special sedan
I am about to install tjm winch cradle.
Instructions say bar has to come off and winch is installed into cradle before cradle is mounted to vehicle.
Thanks guys, yeah looks like bar off
Cheers
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks