Ok guys looks like I have got it sorted.
The big test will be tomorrow morning but started without hesitation or rough idle after sitting for a few hours this afternoon.
I came to terms with the fact that it was definitely a fuelling issue though after much thought.
I started with the fuel filter block and I must admit I found a strange air bleed plug that I hadn’t seen on a Disco 2 before, I thought maybe that was it. No it wasn’t.
I then thought I would put another new set of injector seals in and while I was their I would swap out the injectors as well to eliminate them as well. Still didn’t work.
More head scratching i bit the bullet and thought the only thing left was the Fuel Pressure Reg. I started removing the hose that runs along the inlet manifold and noticed that the o ring was missing at the end of it. Maybe su king in air!!
i then removed the Regukator and also noticed the o ring in their was missing and the gasket looked like the dog had been dragging it around the back yard for the last week.
Some people don’t deserve to own cars!!!
A new Reg fitted $500+ later but it looks like it has done the trick.
Thanks for all the help guys and I hope this may help someone in the future.
