I've never been able to get 1/2" ratchet or extension onto the plug. What works for me is 1/2" square bit of bar that I push into the plug, then use a 1/2" spanner to turn it.
Printable View
I've never been able to get 1/2" ratchet or extension onto the plug. What works for me is 1/2" square bit of bar that I push into the plug, then use a 1/2" spanner to turn it.
I've never been able to get 1/2" ratchet or extension onto the plug. What works for me is 1/2" square bit of bar that I push into the plug, then use a 1/2" spanner to turn it.
I had thought of this and after reading that some one had done it .
worked great about 25mm of 1/2 in square , easy [bigrolf][thumbsupbig]
Quote:
Originally Posted by Tinggu
But a 1/2" wobble drive extension gets past the drum and you can use it in so many other spots.Quote:
Originally Posted by david7307
They are really good bits of kit, I have a selection in 1/4, 3/8 and 1/2" drive
Wot's a wobble drive? I have a little 1/2" unijoint that is quite useful here and there, but not for this job. Wobble drive? Hmmm....
It's like a standard 1/2" drive except ground away to allow drive at an angle. Example:Quote:
Originally Posted by Tinggu
3 Piece 1/2" Drive Wobble Extension Bat Set Ratchet Socket | eBay
Wobble drives, like ball-end Allen keys, are bloody brilliant bits of kit. I wouldn't be without them :) Not quite as strong though, so you need to temper your enthusiasm...
Cool! I can see how that would work. I'll be ordering the kit.Thanks,
Pete