Thread: kill immobilizer in ECU TD5 NNN

Mine is plug and play, you need a map that’s doesn’t have the AS10 module in it.

Cannot help you on the any other method.

Originally Posted by weeds

Mine is plug and play, you need a map that’s doesn’t have the AS10 module in it.

Cannot help you on the any other method.

Thanks for the reply, I know that there are maps that eliminate the problem through the software. I intend to remove the immobilizer with a hardware modification on the internal circuit of the ECU by applying a bridge or cutting a pin or something similar. Discovery has the BCU while the defender has AS10 but I do not know exactly if the architectures are similar

Originally Posted by apogeo

Thanks for the reply, I know that there are maps that eliminate the problem through the software. I intend to remove the immobilizer with a hardware modification on the internal circuit of the ECU by applying a bridge or cutting a pin or something similar. ....

It's probably going to be a lot easier just to get yerself a Nanocom and disable the immobiliser system using that.

Nanocom then comes in handy for those times when diagnosis may be required.

Originally Posted by AK83

It's probably going to be a lot easier just to get yerself a Nanocom and disable the immobiliser system using that.

Nanocom then comes in handy for those times when diagnosis may be required.

Didn’t realise the nanocom can disable immobilizer......