Fitted pro vent to td5

Quote:

---

Originally Posted by PhilipA

I am aware of that and how the CDV works. I have also pulled one apart. It works by inlet depression pulling it shut and is usually open.
The point I was tentatively making is that Many think that the valve in a Provent can replace the valve.

First I have never seen specs on the manifold depression required to shut the valve or even if the valve is a CDV.
After having a look at my fake one a week ago, I wondered if it was actually a relief/bypass valve for when the filter became blocked. In other words the opposite of a CDV. Can anyone confirm the function of the valve? I cannot recall it's function in the specs as listed on the Mann Hummel site.
In the meantime I have left my CDV alone.
Regards PhilipA

---

Ah! Now I understand where you’re coming from... on a Provent 100 / Flashlube Catch Can Pro and presumably their clones - the bottom side vent near the inlet pipe is the pressure relief value and the top vent above the outlet pipe is the vacuum relief valve. When the filter blocks both vents open to atmosphere.

Quote:

---

Originally Posted by laslo71

What was the reason to install Provent? Too much oil in breather hose? I am also thinking about it as I have quite a lot of oil comes out from the hose when I remove and place it in vertical position. See photo. Some peaple says it is normal.
My problem is that I have no place on the left side only on the right (my car is LHD) which means much longer pipes and more difficult routing.Attachment 153530

---

Sorry for late reply. I fitted the “catch can” because it catches the oil before it gets into the intercooler and pipes, which effects performance. I’m sure theirs other reasons but my motor passed a lot of oil through.

Quote:

---

Originally Posted by wozapinin

Sorry for late reply. I fitted the “catch can” because it catches the oil before it gets into the intercooler and pipes, which effects performance. I’m sure theirs other reasons but my motor passed a lot of oil through.

---

I added mine to improve the air getting into the engine, and to extend the inter cooler cleaning kms up to 380k kms