Page 1 of 3 123 LastLast
Results 1 to 10 of 30

Thread: Disco 2 td5 immobilised without eka

  1. #1
    Fordboat Guest

    Disco 2 td5 immobilised without eka

    Hi folks I am in Seven hills NSW and my disco 2 fob won't deactivate the security system. Have changed batteries and fob is working but the receiver in car seems dead. I rang Landrover Australia to obtain the Eka but they did not have it on file so will request it from the UK. In the meantime my vehicle is stuck in a public carpark. Any ideas what to do? Would a nanocom get me out of trouble? I have the key and can open with it but obviously the alarm goes off. Have tried aiming the fob at the roof but no luck.

  2. #2
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,076
    Total Downloaded
    0
    Start the engine ASAP after opening with the key - the alarm should stop.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

  3. #3
    Join Date
    Jul 2014
    Location
    west of Transylvania
    Posts
    3,793
    Total Downloaded
    0
    Hi, as long as it's immobilised no tester will communicate with the BCU, i doubt that it will start after you unlock with the key without the EKA you are stuck untill you can make the fob to unlock the vehicle one way or another.
    Discovery Td5 (2000), manual, tuned

  4. #4
    Fordboat Guest
    It won't start after opening with key. I think the receiver in the roof is stuffed. Anyone know of somebody in Sydney wrecking one.

  5. #5
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,076
    Total Downloaded
    0
    Is there a chemist nearby? It was years ago that chemist shop electronic systems interfered with the D2 alarm/immobiliser so the vehicle had to be moved far enough away to be out of range.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

  6. #6
    Fordboat Guest
    No chemist nearby. Any disco wreckers nearby I would like to try replacing the receiver?

  7. #7
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,076
    Total Downloaded
    0
    Maybe the key needs to be re-matched to the immobiliser so a Nanocom might help.

    Its been too long (9 years) since I had a D2 for me to remember the finer details of the immobiliser.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

  8. #8
    Fordboat Guest
    Any disco 2's getting wrecked in western Sydney?

  9. #9
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,076
    Total Downloaded
    0
    Davis Performance Landys at South Windsor (96791978) might be able to help but not until Monday I expect.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

  10. #10
    Join Date
    Dec 2017
    Location
    wandin nth vic
    Posts
    497
    Total Downloaded
    0
    Don't know about the D2 but a mate of mine has a p38 that had the same fault. Could open the door but alarm would go off and wouldn't crank. Checked battery voltage . Recharged overnight. All good.

Page 1 of 3 123 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!