ZF 4HP22 Gurus. Advice needed.

I think,, [bighmmm]
you can stuff a certain amount of upgraded HP24 parts in,

search in this forum, Stevo? did how own rebuild.

I used a water based degreaser then dried and flushed everything with new atf before installing parts. Torque converter was renewed as it was sus...filled with 2 litres atf b 4 installing.

Not sure how you would clean the tc...fill and drain I guess..but they take ages to drain😐

Quote:

---

Originally Posted by gofer

i was leaning towards cleaning it out etc. am i right in saying i have to use atf fluid to clean parts etc. ?
same sort of stuff is bound to be in the torque converter. is it possible to flush it out ?
this car sat on a driveway for 3 years. gofer :-)

---

I use warm soapy water, rinse with hot water, dry it then wipe it in fresh atf.

you cant completely drain the TC so just get what you can out fill it with some more, turn it a few times and repeat.

thanks again for all the input guys.
will strip , clean , rebuild etc. if i find anything out of the ordinary i'll post it.
regards the torque converter, am i right in saying it must have a high rate of oil flowing through it ?? gofer :-)