How to remove this small bolt ....

Quote:

---

Originally Posted by Blknight.aus

NO..... 2 pertinant cases come to mind

1.

its rumoured that Amelia tried this on and that her last transmission was in fact "crap, the tether on the 10 mil is dra......."

2.MH370's cargo manifest included several loosely secured boxes of 10mm sockets. Its a well known fact that the 10mm socket is metaphasically stable whilst secured on a clip rail or foam shadow board but once removed temporal Asymetricies have the opportunity to develop. The likelyhood of development increases in direct propotion to the amount of movement the socket is subject to with an inverse exponent to the number of people directly observing the socket. There is no-one and no monitored cameras in the hold of an airliner. there were a lot of sockets


I leave you to your own decision about the sanity of teathering yourself to something with the same dimensional stability as a sock in a load of washing in a drier.

---

I smell a conspiracy theory here.......10mm socket causes loss of aeroplane.....

Recently my D2 was parked up for four months while the gearbox got done. That meant that the camper was stuck where it was unable to be opened up.
When I could finally drag the camper to a place where I could open it I was dreading mildew, musty smells and other nasties but I found none of that, thankfully.
What I DID find in the camper though were two 10mm sockets. I'm quite sure that I have NEVER had a 10mm socket in the camper so I surmise that the only way it could have got there was via a black hole or a shift in the space time continuum or something.

Quote:

---

Originally Posted by Markf

Recently my D2 was parked up for four months while the gearbox got done. That meant that the camper was stuck where it was unable to be opened up.
When I could finally drag the camper to a place where I could open it I was dreading mildew, musty smells and other nasties but I found none of that, thankfully.
What I DID find in the camper though were two 10mm sockets. I'm quite sure that I have NEVER had a 10mm socket in the camper so I surmise that the only way it could have got there was via a black hole or a shift in the space time continuum or something.

---

So that's where they are, could you please send them back?

Quote:

---

Originally Posted by V8Ian

So that's where they are, could you please send them back?

---

Ahhh so the three odd and DIRTY socks I found must be yours too, eh?

Quote:

---

Originally Posted by Blknight.aus

NO..... 2 pertinant cases come to mind

1.

its rumoured that Amelia tried this on and that her last transmission was in fact "crap, the tether on the 10 mil is dra......."

2.MH370's cargo manifest included several loosely secured boxes of 10mm sockets. Its a well known fact that the 10mm socket is metaphasically stable whilst secured on a clip rail or foam shadow board but once removed temporal Asymetricies have the opportunity to develop. The likelyhood of development increases in direct propotion to the amount of movement the socket is subject to with an inverse exponent to the number of people directly observing the socket. There is no-one and no monitored cameras in the hold of an airliner. there were a lot of sockets


I leave you to your own decision about the sanity of teathering yourself to something with the same dimensional stability as a sock in a load of washing in a drier.

---

I find that the 10mm socket is quite a tame creature compared to the evil screwdrivers that can read your mind and change from a Phillips head to a flat blade depending on which one you need , and dont get me started on torx drivers

I suppose it should be in the old farts thread but why do they make the handles of Phillips and blade screwdriver sets the same colour?

you scrabble around in the drawer when it would be so simple if the blades were green and the Phillips red or whatever.
regards PhilipA

Quote:

---

Originally Posted by PhilipA

I suppose it should be in the old farts thread but why do they make the handles of Phillips and blade screwdriver sets the same colour?

you scrabble around in the drawer when it would be so simple if the blades were green and the Phillips red or whatever.
regards PhilipA

---

Mine are!

But then I bought them one at a time.

Quote:

---

Originally Posted by PhilipA

I suppose it should be in the old farts thread but why do they make the handles of Phillips and blade screwdriver sets the same colour?

you scrabble around in the drawer when it would be so simple if the blades were green and the Phillips red or whatever.
regards PhilipA

---

still would not stop them reading your mind and changing to whatever head you dont need

Quote:

---

Originally Posted by PhilipA

I suppose it should be in the old farts thread but why do they make the handles of Phillips and blade screwdriver sets the same colour?

you scrabble around in the drawer when it would be so simple if the blades were green and the Phillips red or whatever.
regards PhilipA

---

buy a better brand lol , Stanley has green handle phillips and yellow handle flat blades
Attachment 166580

Quote:

---

Originally Posted by 354 chamberlain

I find that the 10mm socket is quite a tame creature compared to the evil screwdrivers that can read your mind and change from a Phillips head to a flat blade depending on which one you need , and dont get me started on torx drivers

---

what about POSI DRIVES? , seen a few where people have attacked them with a Phillips .