D2 key fobs - where are you buying them from these days

Quote:

---

Originally Posted by V8Ian

What's the trick with the blade? I have one that is loose.

---

I'm pretty sure it just pulled out. If its loose, as they go, it may need to be glued.

I bought 2 of this on eBay and found they are sort of modern rubbish because of some reasons: 1. Poor design with loose cover parts. 2. You have to use extra glue to stick cover parts together, no matter how you want to use it or how careful you assemble the parts. 3. The blade is not 100% fit, so you feel tight all times (i don't use the blade to start car anyway, only use fob to open/close the car).

Only positive point is it looks quite modern, shorter and not pointing the sharp head to my $@# when staying in my pocket :Dhttps://uploads.tapatalk-cdn.com/202...72173e94aa.jpghttps://uploads.tapatalk-cdn.com/202...c45ec3ae7d.jpg

Quote:

---

Originally Posted by tommo1166

Says Land Rover under the tape

---

I got brave and pulled off the tape - and you’re 100% correct :)

RE the blade being loose - yes, they just push in. There is a small plastic boss that fits over the end of the blade and then they both push into the case.
For the price of these Valeo empty cases if the first try at gluing it doesn’t work I’d just replace the case.
They come with a blank blade and the plastic part that slides over it so you can just reuse your old blade and electronic bits.

Steve