happy to have a shot at what i can, no idea what one of them looks like...Quote:
Originally Posted by V8Ian
cheers
Printable View
happy to have a shot at what i can, no idea what one of them looks like...Quote:
Originally Posted by V8Ian
cheers
land rover discovery 2 fuel flap retaining clip - Google SearchQuote:
Originally Posted by incisor
Sent you a PM!Quote:
Originally Posted by incisor
Thank you!
Hi All,
This is my first post as a new member, so I hope it's not out of line to ask if I could order a pair of these drip rails for '02 Disco 2, in WA?
I'll do a proper intro msg in the appropriate spot, but this is the first thread I checked out and it's exactly what I'm looking for. Either way, I'd like to say well done on the prints!!!
That is truly exciting stuff and hold heaps of potential for keeping these beauties looking fresh. Really, really cool!
Thanks.
i have a few to print and am happy to do you a set.Quote:
Originally Posted by Dardy Disco
i hope to get a few pairs done this week
A few notes to those fitting the gutter fittings.
they are printed in eSun ASA which as about as good as it gets for durability / strength on the outside of a vehicle
You can and probably will need to sand them to get the best finish.
the usual auto sanding process with wet and dry should work just fine. you can use a file or sander but you would need to be a tad careful not to induce too much heat etc.
you can use the likes of supercheap auto primer in a spray can then apply any colour you may wish to apply.
i suggest you try fitting them prior to painting as you may need to use a heat gun or hair drier to get the best fit.
You can apply moderate force but bear in mind these are printed parts not moulded parts and although they have the durability they may not have the strength of the original part.
do not apply too much heat as it will induce warping and excessive shrinkage if you get them too hot.
i do not own a D2 so i cannot test fit them prior to delivery.
cheers
They’re like $7Quote:
Originally Posted by V8Ian
Your items have been printed if still interested please pm me your delivery detailsQuote:
Originally Posted by admiralranga
cheers
Inc, will you be adding them to the website?
yeah i shall be, hopefully tonight if i get the chance`Quote:
Originally Posted by rick130
cheers