You could use woven glass mat with a thin black resin to make it look like carbon fibre!
Printable View
You could use woven glass mat with a thin black resin to make it look like carbon fibre!
What's this "you", white fella? [tonguewink]Quote:
Originally Posted by Bohica
You seem to have the best example from which to make a mould, I'll organise a group buy from you. [biggrin]
Yeah ok, what are the down sides to not having the plenum?Quote:
Originally Posted by V8Ian
Water down into the HVAC blower and beyond! That openign at the least needs to be covered.Quote:
Originally Posted by Bohica
On a side note, I found on the TD5 I had to make a small 'shield' to stop water ingress through the opening(under the plenum). .. just some (self adhesive) rubber strip surrounding the raised part of the opening and butted up against the underside of the plenum.
I think what was happening, was water sitting in the bulkhead valley, then when moving off, it'd splash into the opening, down to the blower ... buggered blower.
I sikad fine mesh over the HVAC opening snd then put thick rubber pinch grip over the edge that buts up close to the plenum cover. Works well to keep rats, water and leaves etc out. Cheers
Looking for a transmission guard and this one came up!
LAND ROVER DISCOVERY 2 TD5 SCUTTLE PANEL | eBay