Thread: Td5 discovery 2 FOB key not detected help please

Got a new key (433MHz) a week ago from Aussieremotes fleabay site,was getting ready to send it back to them after having issues with the sync and no luck on the key detect, saw this post and just went out and checked the firmware on the Evo which was 1.35.
Updated to 1.36b and it programmed first go!

Its odd though, in V1.35 I wrote the new key over the top of the original and it sync'd but wouldn't detect, I then tried to write the original key into slot 2 and it wouldn't detect either.
I then wrote the original key back into slot1 and it sync'd and detected perfectly...

I've also noticed the touch senstivity of the screen is far better with this V1.36b update as well and Ive got the original Evo which has always been a bit hard to get a response on the keypress.

Cheers
Andrew

Hi 1madgerman, I have the same problem as you, can you tell me which fuse you have changed because corroded? thank you, Claudio from Italy

Originally Posted by 1madgerman

Fixed, should have followed the kiss principle. Keep ⁴it simple stupid, it ended up being a corroded fuse in the engine bay it's all working now. Thanks everyone for your suggestions.