Results 1 to 5 of 5

Thread: SLS manual?

  1. 20th March 2022, 09:55 AM #1
    Bohica's Avatar
    Bohica
    Bohica is offline YarnMaster Subscriber
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    3,244
    Total Downloaded
    0

    SLS manual?

    Is there a manual for the this? Like how to remove the hoses from the compressor? etc/
    TUA
    Julian
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2003
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.
    LROCV #1410
    Reply With Quote Reply With Quote
  2. 20th March 2022, 07:01 PM #2
    simonmelb's Avatar
    simonmelb
    simonmelb is offline Master Supporter
    Join Date
    Apr 2010
    Location
    South Melbourne
    Posts
    894
    Total Downloaded
    0
    Have you studied the Rave manual? Pp 64-9 onwards.

    I think the air lines are push in ( eg John Guest type) fittings. To remove, push the air line in, then push and hold in the locking collar, then whilst still holding in the locking collar, pull the hose out.

    see also this: Bagpipingandy- How to fit Audi, Jaguar, Mercedes, VW, LR, Wabco air suspension compressor repair kit - YouTube
    Cheers

    Simon
    2003 D2a TD5, ACE, SLS, Vienna Green.
    Reply With Quote Reply With Quote
  3. 21st March 2022, 10:30 AM #3
    lewy
    lewy is offline Wizard Silver Subscriber
    Join Date
    Jan 1970
    Location
    darwin
    Posts
    1,502
    Total Downloaded
    0
    the inlet and outlet are as above but the pipes going to the valves are a 10mm open ended spanner with "olive" connections,be gentle with those as the olive can come off or break easily.
    Reply With Quote Reply With Quote
  4. 21st March 2022, 03:24 PM #4
    Bohica's Avatar
    Bohica
    Bohica is offline YarnMaster Subscriber
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    3,244
    Total Downloaded
    0
    Thanks for the replies. Pirtek and Enzed have the small connectors and tubing. Joiners for repairs as well I hope :-)

    I've bought the repair kit from Andy.
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2003
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.
    LROCV #1410
    Reply With Quote Reply With Quote
  5. 10th April 2022, 06:57 PM #5
    d2dave's Avatar
    d2dave
    d2dave is offline ForumSage Subscriber
    Join Date
    May 2009
    Location
    Tatura, Vic
    Posts
    6,336
    Total Downloaded
    0
    How the airlines are fitted depends on brand of air bag.

    The factory fittings are screw in. I then switched to Dunlop bags and they are a push in fitting.

    I have just swapped to Contitech bags (two days ago) and these are a screw in fitting.

    The airlines to the compressor are the same as what went into the Contitech bags.
    Dave.

    I was asked " Is it ignorance or apathy?" I replied "I don't know and I don't care."


    1983 RR gone (wish I kept it)
    1996 TDI ES.
    2003 TD5 HSE
    1987 Isuzu County
    Reply With Quote Reply With Quote
« SLS Parts | Traction Control? »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!