Thread: Replacing suspension airbag

AFAIK you push in the black thing and it will be able to be pulled apart.
Regards PhilipA

You might find it easier to do with a small spanner (the tube itself is only 4mm) and pull the tubing where it goes back under the chassis rail once you have pressed the ring

Push the silver metal ring inwards towards the air bag using a long nose pliers and you will feel the metal ring suddenly move inwards a couple of millimetres. then, while holding the metal ring at that position, pull on the plastic pipe and it should easily pull out of the little metal ring holder.

It's easier to remove the airline with the airbag in situ.