Suspension problem.

When I lifted mine I went to Les Richmond. I found Andrew Richmond to be very knowledgeable when it comes to LR products, especially suspension.

He asked me a number of questions, eg fitting a winch, bull bar etc.

He then sold me spacers for the rear, adapters for ride height sensors and springs for the front, and 4 Billstein shocks to suit the lift.

This was 10 years and I could not be happier

Quote:

---

Originally Posted by d2dave

When I lifted mine I went to Les Richmond. I found Andrew Richmond to be very knowledgeable when it comes to LR products, especially suspension.

He asked me a number of questions, eg fitting a winch, bull bar etc.

He then sold me spacers for the rear, adapters for ride height sensors and springs for the front, and 4 Billstein shocks to suit the lift.

This was 10 years and I could not be happier

---

X2
I had the exact same experience 10 years ago when he did mine. Actually he wanted me to load up the vehicle as if I was going camping - something about ensuring correct bump stop clearance when loaded.. and retaining body rake / slope from rear down to front.

Quote:

---

Originally Posted by Bohica

I have installed LR Automotive springs ……
……..I have escaped from the 30mm lift. Or have I, I think 265s would look nicer!

---

Yes, it would look better to fill out those wheel arches - I am running 235/85/16s and no rubbing on full lock - the standard steering stops are fine with that size tyre.