Redd the rears will go straight in with the addition of lower perches and upper isolators as you already know.
Fronts can be made to fit, but are not a direct fit like the rears.
Hi all
quick one, will D1 rear springs fit a D2?
I'm currently getting a D2 back on the road and it has air bag rears (SLS) I'm pretty sure it's shot as it has been sitting for at least 6 years, air compressor doesn't kick in. From what I read the air system is prone to failing and the bags are most probably leaking
I have seen a set of 2" rear springs on marketplace pretty cheap and am thinking it will be simpler (and probably cheaper) to swap over to coils. Even if it sits at stock height after the swap, that's fine, I know I'll need a set of spring seats and isolation rubbers but they are easy (and pretty cheap) to source.
I know I keep mentioning price/cost but this is a vehicle I intend to get on the road and then sell to finance another one plus add a few nice bits to my D2 along the way, so the less I have to outlay the better (labour is fine, I can do most things as needed)
cheers
Redd
2003 D2a "The Red Rig" TD5 auto, (number 1 son is now the operator)
2003 D2a "White Weapon" TD5, auto, 17" BFG's and more to follow
Almost qualified as a Land Rover operator
Redd the rears will go straight in with the addition of lower perches and upper isolators as you already know.
Fronts can be made to fit, but are not a direct fit like the rears.
Cheers
Slunnie
~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~
Thanks Slunnie
Google gave me some conflicting information, some straight fit others similar but different heights. Either way I think I'll try to grab them
Cheers
Redd
2003 D2a "The Red Rig" TD5 auto, (number 1 son is now the operator)
2003 D2a "White Weapon" TD5, auto, 17" BFG's and more to follow
Almost qualified as a Land Rover operator
The ride heights is interesting. I was under the impression it was the same, but I just cant see how that can be possible given the extra rear weight of the Disco2. Most 2" lift springs give 20-40mm of lift, so I wouldn't expect too much lift from those springs but you might get increased spring rate.
Cheers
Slunnie
~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~
That's pretty much what I found out as well, I do have a set of 2" blocks if I need a bit height to make things level out. I'm now just waiting to find out if they are still available
Cheers
Redd
2003 D2a "The Red Rig" TD5 auto, (number 1 son is now the operator)
2003 D2a "White Weapon" TD5, auto, 17" BFG's and more to follow
Almost qualified as a Land Rover operator
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks