Page 2 of 7 FirstFirst 1234 ... LastLast
Results 11 to 20 of 68

Thread: SLS Remote

  1. #11
    Join Date
    Oct 2006
    Location
    kinross, Perth, WA
    Posts
    1,573
    Total Downloaded
    0
    definitly not for the discoII as i use it regularly for dropping the backend dow at the drive in cinema so we get a more upward facing angle

    unless it was introduced after mine?
    Thanks

    Steve

  2. #12
    Join Date
    Jan 1970
    Location
    Melbourne
    Posts
    2,622
    Total Downloaded
    0
    Is it or was it programmed to the vehicle?
    If not then the "Plip" needs to be programmed otherwise your just wasting your time.
    As said the doors need to be closed & ignition on.
    No hazards on the D2 but yes with the D3
    Cheers

  3. #13
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    now Ive seen everything...

    if the key needs to be in the ignition and the door needs to be closed FFS press the bloody button on the dash....

    I might have understood if it was for access to the vehicle but hang about... IF you have to lower it to get in wouldnt you have lowered it to get out?


    Disco drivers gotta have everything that opens, closes lifts lowers goes doof doof and probabley makes a coffee while your at it and at the press of a button while 10 feet from the vehicle....I'll keep the simple stuff like my hose outable Dont have to worry about mud or sand getting trampled into the uplholstery or filling it up with water as balast for river crossings defender... Scratch that Im going back to a Na 2.25diesel IIa...

    bloody techno freaks you'll be the end of the world as we know it....
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

  4. #14
    Join Date
    Apr 2007
    Location
    Adelaide
    Posts
    93
    Total Downloaded
    0
    I'm sure the "Plip" was programmed to the car however I do know the car has had a new engine. Maybe it needs re programming to the ECU?

    Do you know if this can be achieved using a sequence of actions or does it have to be done using a computer at a dealer or a rovacom?
    Quote Originally Posted by sniegy View Post
    Is it or was it programmed to the vehicle?
    If not then the "Plip" needs to be programmed otherwise your just wasting your time.
    As said the doors need to be closed & ignition on.
    No hazards on the D2 but yes with the D3
    Cheers

  5. #15
    Join Date
    Apr 2007
    Location
    Adelaide
    Posts
    93
    Total Downloaded
    0
    The SLS remote is a totally separate remote to the key fob.

    Yes it's a bit of a gimmick but hey, I was told it works and it doesn't so I wanna know why. Besides if and when i come to sell the vehicle I want to make sure I inform any new owner of things that do and don't work!

    Thanks for your input though ... it was greatly appreciated.
    Quote Originally Posted by Blknight.aus View Post
    now Ive seen everything...

    if the key needs to be in the ignition and the door needs to be closed FFS press the bloody button on the dash....

    I might have understood if it was for access to the vehicle but hang about... IF you have to lower it to get in wouldnt you have lowered it to get out?


    Disco drivers gotta have everything that opens, closes lifts lowers goes doof doof and probabley makes a coffee while your at it and at the press of a button while 10 feet from the vehicle....I'll keep the simple stuff like my hose outable Dont have to worry about mud or sand getting trampled into the uplholstery or filling it up with water as balast for river crossings defender... Scratch that Im going back to a Na 2.25diesel IIa...

    bloody techno freaks you'll be the end of the world as we know it....

  6. #16
    Join Date
    Jan 2007
    Location
    Karratha WA
    Posts
    369
    Total Downloaded
    0

    Smile Remote SLS control

    Geez, you guys are flash over east.

    We poor pilbara people have to lower the drivers window then reach in with the engine running and push the button on the dash to raise or lower.

    BradM

  7. #17
    Join Date
    Oct 2006
    Location
    kinross, Perth, WA
    Posts
    1,573
    Total Downloaded
    0
    as far as i know the d2 doesnt have a lower button on the dash? im pretty sure mine doesnt... but maybe im just not looking properly!

    Thanks

    Steve

  8. #18
    Join Date
    Apr 2007
    Location
    Adelaide
    Posts
    93
    Total Downloaded
    0
    I'm sure you mean that pushing the button on the dash will raise the back end of the vehicle and then lower it again to it's drive height. Pushing this button on the dash (as far as I'm aware) will not lower the vehicle past it's drive height.
    Please correct em if I'm wrong as this will solve my problem and I'll just lower the vehicle using the button on the dash.

    Quote Originally Posted by BradM View Post
    Geez, you guys are flash over east.

    We poor pilbara people have to lower the drivers window then reach in with the engine running and push the button on the dash to raise or lower.

    BradM

  9. #19
    Join Date
    Jan 1970
    Location
    Brisbane, Queensland (Australia)
    Posts
    1,461
    Total Downloaded
    0
    Quote Originally Posted by Blknight.aus View Post
    now Ive seen everything...

    if the key needs to be in the ignition and the door needs to be closed FFS press the bloody button on the dash....

    I might have understood if it was for access to the vehicle but hang about... IF you have to lower it to get in wouldnt you have lowered it to get out?


    Disco drivers gotta have everything that opens, closes lifts lowers goes doof doof and probabley makes a coffee while your at it and at the press of a button while 10 feet from the vehicle....I'll keep the simple stuff like my hose outable Dont have to worry about mud or sand getting trampled into the uplholstery or filling it up with water as balast for river crossings defender... Scratch that Im going back to a Na 2.25diesel IIa...

    bloody techno freaks you'll be the end of the world as we know it....

    so ....... want to buy a D2 ?

  10. #20
    Join Date
    Jan 2007
    Location
    Karratha WA
    Posts
    369
    Total Downloaded
    0

    It will lower to it's drive height

    Hi,
    If it is raised then pushing the button will lower it to the drive height.

    Also if it is raised once you reach 60 klms an hour the SLS computer will do the same thing if the load is not there any more.

    Great system SLS if you do some heavy towing.

    BradM

Page 2 of 7 FirstFirst 1234 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!