Thread: Show us your D2, PICS only.

Spent a bit of time on the weekend giving the disco a good clean, it has been neglected for a while.

The outside still needs a cut and polish and most of the barwork is to be re-powdercoated in the near future.

Currently putting in a new XYZ switch for the auto and have solved my Amigo's issue from Fraser Island. One of the ABS plugs had perished and filled with salt water when crossing Eli Creek.

Originally Posted by CJT

Spent a bit of time on the weekend giving the disco a good clean, it has been neglected for a while.

The outside still needs a cut and polish and most of the barwork is to be re-powdercoated in the near future.

Currently putting in a new XYZ switch for the auto and have solved my Amigo's issue from Fraser Island. One of the ABS plugs had perished and filled with salt water when crossing Eli Creek.

I Like your rear bar. Is that made by youself?

Messing about in the Glass House Mtns again



Dave

Some damn nice machines

Originally Posted by iPom

Messing about in the Glass House Mtns again



Dave

Hey Mate,

What's the doover on the end of your winch cable called. It looks a whole lot better than a hook.

Happy Days

It's a Factor 55 Prolink from Snake Racing.....bit of bling.


ProLink Loaded

Factor 55 introduces the new ProLink shackle mount for winch cables and synthetic ropes. Engineered and machined in the USA from lightweight billet 6061 aluminum, the ProLink provides a safe means to easily attach a standard 3/4" screw pin shackle to existing winch cable and rope eyes The cable or rope eye is captured into the body of the ProLink by a removable oversized 5/8" double shear pin. The front of the ProLink provides the precision shackle mounting hole and massive 1.2" thick mounting tab. The ProLink is compatible with both Hawse and Roller fairleads and snugs neatly against both versions.

The advantages of winching with a screw pin shackle over a conventional winch hook are many:

Screw pin shackles are up to 5X stronger than conventional winch hooks
Conventional hooks are too small to safely fit both ends of a recovery strap
Recover straps cannot slip out of a shackle like they can with hooks
Hook safety latches are not rated for loads and can tear recovery straps
Conventional hook surfaces add higher stresses to recovery strap fibers, resulting in decreased strap ratings
Shackles can be quickly removed and stowed away until needed for winching.
Hooks do not cinch neatly against fairleads and are prone to rattling and loosening
Conventional winch hooks are designed for chains - not commonly used recovery straps
Engineered, Tested, and Made in USA - Patent Pending
Stress analyzed using COSMOS FEA and destructively tested for confirmation
Billet construction - precision machined from 6061-T6 Kaiser Aluminum round bar
16,000 pound max load rating
Fits all steel cables and synthetic ropes up to 3/8" in diameter
Fits eyes equipped with standard or tube thimbles to 3/8 inch diameters
1.2 inch shackle tab thickness virtually eliminates "shackle rattle"
Massive 5/8 inch diameter carbon steel double shear pin - 6Al-4V Titanium upgradeable
Optional EPDM "Rubber Guard" protects alloy Hawse fairleads - rubber barb attachment
Can be installed and removed in minutes - simple snap ring removal
Cinches neatly against all types of fairleads - Hawse or Roller
Beautifully anodized and zinc plated in the USA

Originally Posted by iPom

It's a Factor 55 Prolink from Snake Racing.....bit of bling.
....
.
.
.

Beautifully anodized and zinc plated in the USA

Yeah Beautiful. But $140 Beautiful?

I'll stick with my hook for now.

Thanks for the reply

Happy Days.

Few pics of the D2 with the new trailer.