SPEEDO CORRECTION....With a Marks Adaptor??

Americans are scared of land rovers. Really.

Quote:

---

Originally Posted by alien

I've just had a look at the links and this unit appears to be like the Marks Adaptor's one.
It either connects to the speedo drive at the transmission end or the ABS unit.
It would not be usable on the Disco 2:(

---

???

There are many of us using TruSpeeds already. I've had one fitted for around a year. They work.

Quote:

---

Originally Posted by twr7cx

???

There are many of us using TruSpeeds already. I've had one fitted for around a year. They work.

---

I have no doubt that they work.
I spent an hour checking things after the above quote and responded in post 20.

As you have had a unit fitted for a year could you please give some more details about it?
Where did you purchase it from and what model do we need?
Which wire do we need at the SLABS?
This is the information Steve223 needs for engineering and registration.

Cheers, Kyle.

Quote:

---

Originally Posted by alien

As you have had a unit fitted for a year could you please give some more details about it?
Where did you purchase it from and what model do we need?
Which wire do we need at the SLABS?
This is the information Steve223 needs for engineering and registration.

---

http://www.aulro.com/afvb/discovery-...-searched.html

Installation instructions - www.slunnie.com :: View topic - Truespeed speedo correction installation

Quote:

---

Originally Posted by twr7cx

http://www.aulro.com/afvb/discovery-...-searched.html

Installation instructions - www.slunnie.com :: View topic - Truespeed speedo correction installation

---

Quote:

---

Originally Posted by Steve223

Just to follow up Michael does not sell the Truespeed Units anymore so don't think there is someone in australia who sell them.

Will try to get details for the manufacturer directly

---

Looks like you timed getting it off Micheal just in time:)

I havn't been able to get onto Slunnie's site.
Your link got me a cached page, thanks.

I have emailed Quadratrac USA they show the Tru Speed Pt/No 33002 module A I have asked if they stock the module B as mentioned in the AULRO forum
Will let you know the results
Regards Ollie

Quote:

---

Originally Posted by alien

Your right:)
I just spent an hour looking into this further.
Thanks for the link, it was one I found while at it.

From what I've found we need a...
Superlift TruSpeed 33002 Module B

Possibly the unit...TruSpeed™ Speed Sensor Recalibrator · Superlift · www.superlift.com
(As linked earlier by twr7cx:))
Fitting instructions..http://www.superlift.com/instructions/33003.pdf
There is 4 different fitting pdf sheets with no reference to any Land Rovers.
We need to identify the correct wire at the SLABS to cut though.

I couldn't find an e'mail link on the Superlift site either.
They do have a free call and fax line numbers listed.
http://www.superlift.com/contact.asp
I'll leave Ollie or Steve223 to look into it now:)

Cheers, Kyle.

---

yea that's why I will get it done by the guy here in Sydney the time I spent researching then installation etc does not warrant the saving

Quote:

---

Originally Posted by Ollie

I searched for Samras Iceland without result

Regards Ollie

---

It just takes a bit of goggle-fu:

Samras ehf

Looks like they are just selling the Superlift unit anyway.

Does anyone actually own a copy of RAVE?

Wire C504-3: Pink with a green trace.

It took less than 5 minutes including downloading and reading the Truspeed instruction to find the information, and I have no need or interest in fitting a Truspeed :p

http://www.aulro.com/afvb/attachment...1&d=1382411948

http://www.aulro.com/afvb/attachment...1&d=1382411974

http://www.aulro.com/afvb/attachment...1&d=1382411995

Booked car in for next Wednesday at General Auto Instruments 19/21 East St Lidcombe NSW 2141 $300 +GST