Centrifuge cover

You can go to bunnings and get the packets with different lengths in them but you should be able to get M6x30mm.
Cheers Ean

Quote:

---

Originally Posted by alien d2

From memory at least one of mine is 40mm..
Just make shore they don't bottom out (I know one can't but not shore on the second).

Cheers, Kyle.

---

The bolt furthest from engine goes staight through but thread needs to be cleaned with a tap as the last bit tapers.
The M6x40 will make it but the last bit is vey tight and one runs the risk of strippping the thread again.