Oil filter ... what a bitch!!!!!!!
had to knock it round with hammer and a screw driver. how the hell you get it off with the head and exhaust manifold on is a mystery..
Printable View
Oil filter ... what a bitch!!!!!!!
had to knock it round with hammer and a screw driver. how the hell you get it off with the head and exhaust manifold on is a mystery..
Hi waroo
The lifters not being upright shouldn't be a problem, my laid flat and I haven't had any problems.
I used a belt filter removal tool with the socket handle below and to the rear of the filter. The turbo heat shield was always left in place too.Quote:
Originally Posted by waroo
Cheers for that tip ill give it a go next time.
Thanks
or try one of these
Reversible 2 way Oil Filter Wrench for Filters 2.1/2'' to 4'' 63.5mm to 101.6mm | eBay
:D
Hi Hendrik,
thanks for your reply. ok thats good, i was thinking that it should be ok.
Many thanks
Regards