Four Amigos Instead of Three!

Quote:

---

Originally Posted by Redback

D2 RESET

1) With key in the ignition, motor and ignition in the off postion

2) open drivers door

3) remove key wait 10sec

4) insert key

5) close drivers door

6) start car

Baz

---

Baz
Thanks alot for explaining what D2 reset is now i know one more thing about the D2
Cheers Kelvin
Ah yeah by the way the CDL switch was faulty when i had that problem with cutting the wire did your new ecu change the lights coming on (SORRY TO CHANGE SUBJECT )

Quote:

---

Originally Posted by TerryO

In case it makes a difference the Disco is a 2003 V8 HSE



Cheers,
Terry

---

Can a nanocom be hooked up to a V8??

I hope so... :confused:


cheers,
Terry

Quote:

---

Originally Posted by disco_thrasher

Baz
Thanks alot for explaining what D2 reset is now i know one more thing about the D2
Cheers Kelvin
Ah yeah by the way the CDL switch was faulty when i had that problem with cutting the wire did your new ecu change the lights coming on (SORRY TO CHANGE SUBJECT )

---

Hey Kelvin, no didn't change anything, still need to cut the wire:(

Quote:

---

Originally Posted by Gold_TD5

Can a nanocom be hooked up to a V8??

---

I've been told it can:confused:

Quote:

---

Originally Posted by TerryO

I hope so... :confused:


cheers,
Terry

---

So do I:D

Can't hurt to try;)

Baz.

Quote:

---

Originally Posted by disco_thrasher

no sorry have not ,dont read every single post on the forum ,normally spending it wheeling or working;) :censored: :coplight: :rocket:

---

Thats cool,, its (TGO) not a READ EVERY SINGLE POST forum ,,

Its a forum that every single member should contribute to,,,

:cool:




oh,, and I'm posting this from Deepwater NP,,

wheeling,, as you say,,

How is your battery???
I got the 4 amigoes when my alternator died a few weeks back.Went away without using my Nanocom once the alternator was replaced.
If you have a multi-meter(less than $40 to buy) test the battery voltage(at the terminals) with engine off,engine running,engine off lights on high beam,engine running lights on high beam.
These 4 values will let you know if the battery is low or if the alternators not charging properly.
Not sure that a Nanocom will initialize on the V8 as the engine ECU is different.
GOODLUCK
Andrew

Thanks Andrew that is something I can test.

I have a suspicion though that it is Brake related, there is some squealing happening when I put the brakes on and that is something which keeps being spoken about as a potential cause of the Amigos.

I'll be pretty annoyed though if the brakes are low and that is the problem given that only a few hundred K's ago I had the big 120,000 klm service done which cost a small fortune plus some.

Cheers,
Terry

Quote:

---

Originally Posted by Pedro_The_Swift

Thats cool,, its (TGO) not a READ EVERY SINGLE POST forum ,,

Its a forum that every single member should contribute to,,,

:cool:




oh,, and I'm posting this from Deepwater NP,,

wheeling,, as you say,,

---

ah okay will make more regular visits there
now go enjoy your wheeling and holiday :D
enjoy your break
cheers kelvin

Quote:

---

Originally Posted by Redback

Sorry yeah, motor/ignition in the off postion.

Baz.

---

Baz

Just finished reading your reset steps on my Blackberry when the missus stopped to fill up on way home from Canberra.to Sydney. When she went to restart nothing just winding over she flashes me that look that says why didnt we take the crumbledoor. I says no worries try this (reset)D2 starts. All happy knew there was a reason why I drink and she drives.

Cheers Wayne

Terry need details, we are leaving here at 8am, should get to Goulburn around 10am, PM your number.

Baz.