Nanocom READALL firmware.

I need to know tour email address to give access to the correct folder.

Pete

Quote:

---

Originally Posted by B-A-S

I need to know tour email address to give access to the correct folder.

Pete

---

Perhaps you could copy the file(s) into your public folder and post the public link instead?

Interested on these files too :-) bbdd_2004@yahoo.es

Many thanks in advance.

I could not send a PM so I've emailed my dropbox email details.

Hi All,

I hope B.A.S does not mind but thought it would be easier to add link to file here.

Dave.

Could I have access to these files too.... Please..
shaheed.kajee@bigpond.com

Thanks heaps

Thanks DavidB .. pays to read threads first before posting.

Thanks David, i was unsure of the forum rules re software etc so didnt post.

I came on today just to ask could someone post a more accessable option :)


Pete

Tired to use the firmware 1.09 patch but couldn't get it working.

I:
Powered on the Nanocom device by attaching it to the car.
Plugged in the serial cable to a laptop
Ran the 1.09 patch firmware
Got the error "Unable to cennect to nanocom bootloader" (with that spelling ;)).

I tried pressing a button on the Nanocom and that puts in remote mode but that does not help.
The Nanocom is able to talk to the computer.

We tried a few combinations but nothing seemed to resolve the error. The Nanocom says its running firmware 1.09...

I only ticked the "firmware" button, set the COM port number and hit the download button.

Any ideas?

Ive just tested both versions here and they work on my tool no problems.

28 05 2008
How can I upgrade the firmware?


To load the firmware upgrade that you can find in the restricted area of this web site:

First you have to disable the INSTRUMENT option if it is active. To disable this option you have to give power to the Nanocom keeping pressed key 1 (the first on the left) until the display shows the words "NANOCOM rev X.XX" like the normal startup. Now enter the function STARTUP SETTING of the NANOCOM SETUP menu and select the item NORMAL instead of INSTRUMENT
Now press OK and ESC until the Nanocom turns off, or cut the power supply
Connect the Nanocom to the PC through the USB or RS232 port
Turn on the Nanocom without pressing any key, the display must show the words "push a key or connect me" and the LED must be on with RED light.
Launch the application NanocomFirmwareLoaderX.XX.exe
Select the COM port number used by the Nanocom (required also for the Nanocom with USB because the USB device is seen by the applications as an emulated COM port )
Click the button "Download" and wait for the end of the process.
The firmware is correctly stored when the "Firmware download done succesfully" message box appears
Click Ok to close the application