Results 1 to 3 of 3

Thread: nanocom fault code

  1. 12th January 2012, 02:35 PM #1
    landy's Avatar
    landy
    landy is offline Master
    Join Date
    Jan 2009
    Location
    Seymour, Victoria.
    Posts
    751
    Total Downloaded
    0

    nanocom fault code

    Hi all,
    Can anyone help me with a problem ref the "three amigos" I have just returned from the Vic high country and while I was climbing a few hills the traction control cut in as normal and illuminated the dash light for a few seconds and went out as traction was regained, as normal. But if I lost traction for an extended amount of time, say 10 second(ish) the three dash lights came on and refused to go out until the ignition was cycled. When I returned home I connected my Nanocom and found that the code was 13-06, "Pump failure 4. pump running when not activated"

    My question is:-
    1. has anyone had this problem, and what did you do to fix it?

    2. Do I need a new (expensive) pump or is it the shuttle valves sticking after traction is regained and causing the pump to continue to run?

    Cheers, Nino
    Reply With Quote Reply With Quote
  2. 13th January 2012, 06:49 AM #2
    OffTrack's Avatar
    OffTrack
    OffTrack is offline YarnMaster
    Join Date
    Feb 2011
    Location
    Brunswick, Victoria
    Posts
    3,778
    Total Downloaded
    0
    The codes indicate the pump relay or the recirculation pump in the ABS modulator.

    Have a look at the troubleshooting for fault 7.7 in the attached pdf. The LR codes are obviously different to those used by Wabco but the fault is the same/similar.

    The only LR docs I have seen that relates to the fault are for early D2's. Again the code is different (01.5) but the fault description is the same. The main cause of the fault was a dodgy batch of pump relays. ABS Modulator replacement was only mandated if the pump had run continuously for more than 30 minutes which doesn't sound like the case for you.

    The D2 Tech Bulletin (31279.pdf) is attached to this post:

    http://www.aulro.com/afvb/discovery-...ml#post1525218


    cheers
    Paul
    Last edited by OffTrack; 10th April 2012 at 05:32 AM.
    Reply With Quote Reply With Quote
  3. 13th January 2012, 11:36 AM #3
    landy's Avatar
    landy
    landy is offline Master
    Join Date
    Jan 2009
    Location
    Seymour, Victoria.
    Posts
    751
    Total Downloaded
    0
    Paul,

    Thanks so much for that info, and the down load. Thats more help than I hoped for.

    Cheers Nino.
    Reply With Quote Reply With Quote
« SXE-Probe VFP1000 Oscilloscope & Digital Multimeter | Input data not woking on new nano com evo? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!