Low profile 90º OBD2 and DB15 connectors

**winaje** · 16th January 2013, 01:58 PM

Thanks Paul, stupid me for not reading from top down.

Out of interest, what's a completed cable worth to buy from you, in say 750mm length? I want to mount above the right centre console aircon vent, as close as possible to the binnacle switches. Have the engineer at work designing a mounting bracket for me to hold firmly

**gavinwibrow** · 16th January 2013, 04:35 PM

Originally Posted by winaje

Thanks Paul, stupid me for not reading from top down.

Out of interest, what's a completed cable worth to buy from you, in say 750mm length? I want to mount above the right centre console aircon vent, as close as possible to the binnacle switches. Have the engineer at work designing a mounting bracket for me to hold firmly

Or maybe modify the one that BBS now have - they didn't have one when I was looking 12 months ago

**iPom** · 17th January 2013, 04:45 PM

I'm keen to buy one too Paul??

Dave

**winaje** · 17th January 2013, 04:54 PM

Paul is probably on the computer as we speak organizing a factory in China to produce them for $5.84 each lol

**gavinwibrow** · 9th February 2013, 04:28 PM

Originally Posted by OffTrack

I finally finished putting together a short cable with the r-a connectors, and some jaycar sensor wire. The length is per gavinwibrow's request as he is mounting his Nanocom in front of the D2 coin tray, which seems to be a reasonably good place to house the Evo.

Hi Paul. I finally fitted the cable - just the bees knees. I'm most impressed and as noted on another thread it is very dainty and elegant - not at all like the driver!
Many thanks and a good win - win.

**Shakey** · 24th July 2013, 07:36 AM

Just a quick note to people - don't bother with Fes-Auto if you're thinking about making one of these. I ordered well over a month ago, not response on email or phone and I've got Amex to sort out a refund for me.

I've just ordered OBD2-Shop.eu - OBD-2 Stecker rechtwinkliger Abgang so hopefully they should be better. I've also ordered a few spares incase anybody wants one.

**Rok_Dr** · 24th July 2013, 10:34 AM

Hi Jake

I'll happily buy one off you. Let me know details by PM when you are ready.

Cheers

Steve

**clubagreenie** · 24th July 2013, 10:52 AM

Paul,

Have you actually started supplying these as a product? I only ask as if not I'll order in some of the ends, offering any excess to whoever needs. But didn't want to step on any toes. If so then how much?

**OffTrack** · 24th July 2013, 11:01 AM

Originally Posted by clubagreenie

Paul,

Have you actually started supplying these as a product? I only ask as if not I'll order in some of the ends, offering any excess to whoever needs. But didn't want to step on any toes. If so then how much?

I basically did one cable for Gavin as a thank you for sending me the obd-ii connectors he'd bought but wasn't going to use. The thread was for informational purposes so no toes will be trod on

cheers
Paul

**Shakey** · 24th July 2013, 11:09 AM

Assuming these actually arrive this time, I've ordered:

2 x OBD2-Shop.eu - OBD-2 Stecker rechtwinkliger Abgang
2 x OBD2-Shop.eu - OBD-2 Stecker rechtwinkliger Abgang Clipausfhrung

I'll use one (and assuming my soldering skills aren't too rusty I won't need any as spares!), there will be 3 left over for people that want one (Rok_Dr has already asked for one!).

I've also got a spare one of the the right angled connectors for the nanocom end too.

Thread: Low profile 90º OBD2 and DB15 connectors

Thread Tools

Low profile 90º OBD2 and DB15 connectors

Low profile 90º OBD2 and DB15 connectors

Bookmarks

Bookmarks

Posting Permissions