Thread: Nanocom Evo problem

Seems about right. I think that's what I paid when I had a problem with mine. Wasn't happy having to pay for it, but what other options are there when they are in Cyprus? At least it works now.

Originally Posted by stock d2

I seem to having problems with my nanocom. When I connect to the obd port it does not turn on. However when I connect it to an external power supply the nanocom powers up and I can access my D2s ecu and read all the fault codes. Is there a fuse in the d2 that is blown or is it a fault of the nanocom? Does it have an internal fuse?

I don't think the cable is broken as I only just got the nanocom and it was powering up fine up until this evening through the obd.

Bit hard to read speed sensors if I'm reliant on an external 240v/12v dc transformer.

I had a similar issue with my nanocom, where i shorted out the pins on the OBD port and blew a fuse. As a result my clock and interior lights no longer worked. I cant remember which fuse i replace though :/ Sorry Maybe fuse 30


The nanocom would still work with the usb and DC plug also