-
10th April 2013, 07:57 PM
#1
Nanocom
Hi, I have just brought a Nanocom, and was running through the programs and some how I did something to the interior light. When I unlock the truck the interior light flashes, but won't stay on. I have to switch the light on and off manually. I know I have pressed something on the Nanocom while going through the menu but I can't find the control for the interior light. Can any one help
Thanks in advance
Geoff.
-
11th April 2013, 06:52 AM
#2
It would be helpful if you included some basic information like what vehicle you have. Modules and settings are vehicle specific.
You have learnt lesson one of nanocom ownership: don't **** with settings unless you know what they do. At very least make a backup of the settings before you starting playing.
There is documentation on http://web.nanocom.it for each module. Beyond that you'll need to look at RAVE for detail - the BCU or equivalent section should give a detailed description of the options available.
Cheers
Paul
-
15th April 2013, 08:23 AM
#3
Hi OffTrack, yes lesson learnt, son fixed it up, apparently I was doing it right but I didn't turn the ignition switch off. Will buy a micro sim card and have son set it up properly. I have a 2009 Defender 110 HCPU.
Thanks Paul,
Geoff.
Sorry for not getting back sooner, loss of internet.
-
15th April 2013, 10:43 AM
#4
Glad to hear you've got it worked out. 
cheers
Paul
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks