Results 1 to 6 of 6

Thread: Nanocom capability - correct speedometer reading?

  1. #1
    Join Date
    Sep 2013
    Location
    Willamstown Victoria
    Posts
    11

    Nanocom capability - correct speedometer reading?

    I have found that the Disco IIA I just bought has a speedometer that reads UNDER road speed. About 5% lower than actual speed, compared with a phone GPS speedo app. It cost me $425 to find this out ... (booked on freeway travelling from Adelaide to Melbourne). As we are all aware, speedos normally have errors in the other direction, reading about 4-5% higher than actual speed. Unfortunately, I was bargaining on this when I set the cruise control.

    How can I fix this (apart from ditching the 5 brand new Cooper tyres that appear to be oversize)?

    Is the Nanocom able to adjust the speedo reading?

    If not, do I have any other options? Can a Land Rover workshop do anything? As I'm likely to have the car for a while, I might order a Nanocom if it will do this...

    Any advice will be greatly appreciated.

    Cheers,

    Michael Hall

  2. #2
    Join Date
    Jan 1970
    Location
    Shepparton
    Posts
    1,544
    I think this topic has been covered in another thread.
    Within nanacom their is a speed correction function - but I understand this is only for the nanacom reading and does not change the actual speedometer in the vehicle.
    Other option is to track your speed via a GPS and mark your instrument panel where the true speed is in relationship to the displayed speed.

  3. #3
    Join Date
    Dec 2016
    Location
    Belmont
    Posts
    198

    Nanocom capability - correct speedometer reading?

    Here you go post #28 has the linkNanocom capability - correct speedometer reading?

    SLS height controller and Speedo corrector

    SLS height controller and Speedo corrector

  4. #4
    Join Date
    Dec 2016
    Location
    Belmont
    Posts
    198
    And this one

    Truspeed speedo correction installation - new link to guide

    Truspeed speedo correction installation - new link to guide

  5. #5
    Join Date
    Dec 2014
    Location
    Branxton, NSW, Australia
    Posts
    49
    I have a defender which I put in a disco lt230 and needed a 'speedo healer' to get my cruise to work. I put it in line between the speedo and ecu, you need it between the speedo sensor on the transfer case and the speedo.
    Speedo Healer
    $130 plus shipping, you need the speedo healer unit plus the universal harness. Wire it in (easy job) and set a correction figure of plus 7% or so. Happy Days
    2005 Defender 110 Wagon TD5
    250,000km

  6. #6
    Join Date
    Apr 2016
    Location
    Melbourne
    Posts
    537
    a big note about the speedo healer.
    My brother found out the hard way .. they're no good for the Disco.
    Disco2 uses the ABS sensors, whereas the Defender uses a speedo drive unit in the driveline(as already said).

    You need the Hunter Di box. This is the easiest product to source at the moment.
    We couldn't find any sources for the TruSpeed.
    Hunter Di still answers emails, and that's how you'd acquire one.

    The Nanocom can't adjust the speedo(on your cluster), but can be set to show a percentage less than what your speedo shows using the adjustment feature.
    So it only shows you (in instrument mode) it's own speedo reading. Your (cluster)speedo will still show lower readings.
    D1 300 Tdi Auto

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!