Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: A post that all late LR owners need to read

  1. #11
    Join Date
    Sep 2009
    Location
    Limassol, Cyprus
    Posts
    450
    Ah I see you beat me to it
    Colin
    MD of Blackbox Solutions Ltd.
    www.blackbox-solutions.com

  2. #12
    Join Date
    Jan 2016
    Location
    Brisbane
    Posts
    3

    Rovacom IQ

    Colin,
    Have downloaded the app and had a play with it - looks really good. One question, I was looking for the Auto Transmission oil temperature in the live inputs but can't find any, is this available? It would be useful when towing.
    I have my name down to buy the nanocom but looking to swap to the Rovacom IQ

    Regards,
    Oskar

  3. #13
    Join Date
    Sep 2009
    Location
    Limassol, Cyprus
    Posts
    450
    Hiya Oskar
    Thanks for your appreciative comments.
    As you can see, we have put a really huge amount of thought, time and effort into this and as such we are naturally very proud of it. We have ensured that it not only performs as good as it looks but also that is by far the most advanced and easy to use diagnostic and monitoring system for later Can Bus based Land Rovers in so many ways.

    When it is connected to a vehicle via the VCIQ, especially to begin with, it actually feels a bit magical, in comparison with traditional equipment, due to its high degree of self intelligence, constant monitoring and automated synchronisation. We have of course provided traditional functionality like buttons to read fault codes and read vehicle / ECU information etc, but these are not really required because the VCIQ reads everything, figures it all out automatically and then updates the ROVACOM-IQ app every few minutes or so, which then keeps all the last updated information in a database on the mobile device(s)

    Cleverly, this means that even when the device / app is not connected to a VCIQ, Ie in off line mode, you can still browse through the information from when it was last connected, which is pretty cool.
    This also means that the ROVACOM-IQ app download comes complete with pre populated database from a VCIQ/vehicle to provide at least a part demonstration capability.

    For convenience, especially as we have been very busy with last minute polishing (progress details / availability update to follow), the vehicle information included in the latest app download is from our 2010 RRS bench test Rig.
    Unfortunately due to the Auto Gearbox ECU (mechatronics) being internal to the physical gearbox itself, that happens to be one ECU that we do not have on our bench test rig and because the system is intelligent, it only shows the ECU's it can communicate with / detect.

    This explains why you do not see the Automatic transmission ECU listed in any function of the App you have downloaded.
    However as you can see from the coverage document

    http://www.rovacom-iq.com/preview/ro...ctions-details

    The Automatic Gearbox is of course covered and I can confirm that there is indeed a live inputs value for the ECU Internal Temperature which is effectively the Temperature of the Oil in which the ECU is immersed.
    Colin
    MD of Blackbox Solutions Ltd.
    www.blackbox-solutions.com

  4. #14
    Join Date
    Mar 2018
    Location
    Sydney
    Posts
    106
    Hi all

    Mines now paid for and on its way. I'll look upon as a late xmas present to myself :-)

    Mike
    Fuji White MY13 D4 SDV6 SE 3.0 Litre, 8 spd auto.

  5. #15
    Join Date
    Sep 2009
    Location
    Limassol, Cyprus
    Posts
    450
    Hiyas All
    I can indeed confirm that we have finally just started shipping out the very first VCIQ's

    Sorry it's a bit of a late Christmas present for you Mike ;-)

    We did try our best to finalise things so we could ship these out in time to arrive before Christmas for obvious reasons, and we were just about ready with a week to go, however, as a brand new product, we appreciate that despite our best efforts, we may have possibly overlooked something that may possibly need our immediate support / rectification and so chose not to ship them at a time when they would arrive while we were closed for the Christmas break.

    So instead of rushing these out, we spent our last week re visiting the initial setup and configuration process and searching for solutions to ease this.
    One aspect that we addressed and has alway been a bit of an issue for me was the number of requirements that all had to be done at the same time that was very frustrating when all you want to do is plug it in and get it working.
    Bluetooth Connectivity / configuration, On line Registration, Licence download / Installation, VCIQ & Vehicle activation, Master Password entry, possible VCIQ firmware updating to name but a few.

    Myself and my technical team came up with a huge amount of improvements and very innovative solutions for removing, reducing or delaying these initial aspect requirements. So now you can use it pretty much straight away with the very minimum requirements. It is now supplied Pre Licenced, with Bluetooth connectivity much more self automated, wont need to do firmware updates immediately, unless you try to run a higher level function and won't immediately have to register on line and get / enter the VCIQ's master password as you will be able to use it a few times before you have to do this.

    We hope it will be really easy to get going and we will be there to support anyone who has any difficulties and look forward to any feedback.

    ATB

    Colin
    Colin
    MD of Blackbox Solutions Ltd.
    www.blackbox-solutions.com

  6. #16
    Join Date
    Aug 2017
    Location
    Rover
    Posts
    1,549
    Hi Colin, are you planning to release one for Puma Defenders?
    1998 Land Rover 110 Series IV 300 Tdi
    2014 Land Rover 110 Series VI 2.2 Puma

  7. #17
    Join Date
    Sep 2009
    Location
    Limassol, Cyprus
    Posts
    450
    The answer to that question is actually not as simple as it might seem and is certainly not really down to me / us as it's actually down to factors beyond my control, as I will try to explain.


    Technically, of course we designed the VCIQ with not only the capabilities to communicate with CAN BUS ECU's but also earlier legacy (Non CAN BUS) ECU's, such as those in the Discovery 2, L322 Range Rovers prior to 2010, as well as the Defender TD5 and Defender Puma Legacy Systems, but also far more than the required code / memory space that would allow us to implement this.

    So although we certainly do have the ability to add coverage of these models on this Rovacom-IQ / VCIQ platform, alongside the coverage very extensively provided by the now well respected Nanocom, with the exception of the pre 2010 L322.


    But just as was the situation with the Nanocom a few years back, when even I did not know if it could be saved and got a lot of flack for, the Nanocom would certainly not have become what it is today to mutual benefit without the help, support and feedback, particularly from a good number of members of this forum.

    We here at BBS may well build and supply the Nanocom, but it was truly a supplier / customer collaboration that was what made it the success that it is today, from which so many Land Rover owners and forum members have benefitted and have seen our efforts to fix, debug, develop and add to it's coverage and capabilty.


    We have quite obviously and clearly invested vast amounts of time, money and effort into developing this truly next generation mobile application system, and of course would love nothing more than to be able to develop it further and add to its capability in all aspects.


    But once again, as with the Nanocom, success or failure of this development and my / our abilities to continue funding developing this further are, as I previously stated I would explain, factors beyond my control.


    I may well be the Boss at BBS, but I am old and wise enough to know and respect that the real Boss is always the customer etc ;-)


    Apologies for the long winded answer to what seemed to be a yes or no answer type question Zeros, but it is what it is ;-)

    Regards Colin
    Colin
    MD of Blackbox Solutions Ltd.
    www.blackbox-solutions.com

  8. #18
    Join Date
    Jan 1970
    Location
    Manly QLD
    Posts
    1,374
    Hi Colin - can Rovacom be used to add a new genuine key? 2011 SDV6 D4
    L322

Page 2 of 2 FirstFirst 12

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!