Try powering it separately through the usb cable. Sometimes it doesn't get powered through the OBD port. My connection sequence is:
1. Connect to OBD port
2. Connect power to Nanocom
3. Turn on ignition
Make sure the card is not inserted into the Nanocom. You put it in after you have connected to the car if you need to.
It's a brilliant tool, even if you only use it to check to see if you have any error codes.
2013 D4 expedition equipped
1966 Army workshop trailer
(previously SII 2.25 swb, SIII 2.25 swb & lwb, P38 Vogue, 1993 LSE 3.9V8 then HS2.8)
Bookmarks