Members with diagnostic equipment

Hi, does anyone have a code reader they are willing to plug into my car for me that will give me more detail than just "suspension fault".

The compressor is only a year old, so this is something else. Been in fault for a week, I'm slowly running out of ride height. Keen to fix this myself and not have to go to the mechanics, but it's hard to know exactly what part isn't working.

In Perth in Melville area. Can bring beer in exchange.

Thanks.

Some code readers are vehicle/model specific so it would be helpful if you advised your vehicle details.

Hello, anyone around adelaide northern suburbs that can plug nano in for a flashing odo reset and a fault code read much appreciated. Went to shops today and couldn't cross t-junction safely due to non responsive throttle. Also willing to buy used one if available.

Nanocom Evo with unlock codes for Defender (TD5 and Puma) and Disco TD5

Located in Canberra.

Hi everyone...

I'm new to the forum, and have an issue with the BCM... so I bought a second hand replacement unit. Scan tool identified that the VIN numbers don't match (der)... is there a scan tool that I can input the correct VIN number? or did I waste my money [bigsad]

Downloaded the Rovacom app to see if that would have functionality, but don't want to spend money if it isn't going to do what I need.

Thanks in advance.

Christine
Discovery 3 TDV6 SE

Quote:

---

Originally Posted by Grentarc

I have an IID Tool BT which will read/clear faults (+ others) on all vehicles they support and also activate TTM for EAS models.
Located Wagga Wagga NSW

Defender L316 2007-15
Discovery 3/LR3 L319 2004-09
Discovery 4/LR4 L319 2010-2016
Freelander 2/LR2 L359
Range Rover Evoque L538 2011-2016
Range Rover L322 2002-05
Range Rover L322 2006-09
Range Rover L322 2010-12
Range Rover L405 2013-2016
Range Rover Sport L320 2005-09
Range Rover Sport L320 2010-13
Range Rover Sport L494 2014-2016

Capabilities (not VIN locked)
Fault Read / Clear of all vehicle systems
Service routines (including service reminder reset)
Live Data
Manual Components Activation (Output Control)
Calibrations (except suspension)

---

Hey mate, are you still in Wagga? You don't have a nanocom for a Td5 by chance?

Would there happen to be any members in or around Albury / Wdonga that can assist in programming a new smart Key for a RRS 2010 3 litre TDV6?

Quote:

---

Originally Posted by Andych

Would there happen to be any members in or around Albury / Wdonga that can assist in programming a new smart Key for a RRS 2010 3 litre TDV6?

---

You'll need a license for your VIN added for key programming.

Hi all,

I'd there anyone in the Gerringong, Gerrora, Shoalhaven area with a nanocom for a Td5 Defender? I've got an NNN ecu I want to swap in and wondering if anyone in the area could help a gut out! I'll be around from the 26th to the 31st Jan 2022. TIA!

Greetings all,

Just taken delivery of a brand new Nanocom Evolution for Discovery 2, V8 Motronic codes. Still figuring out how to use it.
Since I have both a manual 4L V8 and an auto 4L V8, I figure it was worth the cost.
Guess I'm committed now...[bigwhistle]

Gatton-Toowoomba area, SE Qld, if anyone's desperate.