Results 1 to 6 of 6

Thread: Nanocom diagnostic readings

  1. 15th February 2009, 07:51 PM #1
    Grumpy's Avatar
    Grumpy
    Grumpy is offline Master Supporter
    Join Date
    Dec 2008
    Location
    Riverton W.A.
    Posts
    254
    Total Downloaded
    0

    Nanocom diagnostic readings

    I have just purchased a Nanocom unit and have a couple of queries.

    1. What is meant by the wording " cylinder balance values?

    2. The unit comes up with an operating voltage of 13.5v +/-. Starts around 13.9volts then quickly drops.

    I thought if that is the voltage going into the battery it should have been it should have been around 14.2 or so volts continueous. Maybe I am thinking on the wrong channel.

    Tony
    Reply With Quote Reply With Quote
  2. 15th February 2009, 08:12 PM #2
    Psimpson7's Avatar
    Psimpson7
    Psimpson7 is offline TopicToaster
    Join Date
    Sep 2007
    Location
    Gold Coast
    Posts
    6,078
    Total Downloaded
    0
    thread on cylinder balance readings

    http://www.aulro.com/afvb/technical-...-readings.html

    With regard to the voltage it will drop so thats fine. Put a multi meter on the battery and you will see.
    Reply With Quote Reply With Quote
  3. 15th February 2009, 10:00 PM #3
    Grumpy's Avatar
    Grumpy
    Grumpy is offline Master Supporter
    Join Date
    Dec 2008
    Location
    Riverton W.A.
    Posts
    254
    Total Downloaded
    0

    cylinder balance

    Quote Originally Posted by Psimpson7 View Post
    thread on cylinder balance readings

    Td5 cylinder balance readings

    With regard to the voltage it will drop so thats fine. Put a multi meter on the battery and you will see.


    Thanks for that, I looked at the previous threads--must have missed it.
    Thanks again.

    Tony
    Reply With Quote Reply With Quote
  4. 28th February 2009, 06:42 AM #4
    wozzlegummich's Avatar
    wozzlegummich
    wozzlegummich is offline Master
    Join Date
    Jan 1970
    Location
    N.E. 'burbs Melbourne
    Posts
    152
    Total Downloaded
    0

    Nanocom - Where D'ja gettit?

    Hi Grumpy, Can I ask where did you get your nanocoma and how much did you pay?

    Cheers,

    Robbie
    Reply With Quote Reply With Quote
  5. 28th March 2009, 11:02 PM #5
    Grumpy's Avatar
    Grumpy
    Grumpy is offline Master Supporter
    Join Date
    Dec 2008
    Location
    Riverton W.A.
    Posts
    254
    Total Downloaded
    0

    Sorry for the delay.

    Hi Robbie,

    Sorry for the delay, have been away down our South Coast for a month.

    The Nannocom was obtained from Rovacraft over here in the West.

    Tony
    Reply With Quote Reply With Quote
  6. 30th March 2009, 07:46 AM #6
    Redback's Avatar
    Redback
    Redback is offline Swaggie Subscriber
    Join Date
    Jan 1970
    Location
    Ellendale Tasmania.
    Posts
    12,986
    Total Downloaded
    0
    Quote Originally Posted by wozzlegummich View Post
    Hi Grumpy, Can I ask where did you get your nanocoma and how much did you pay?

    Cheers,

    Robbie
    $499 + $10 postage from Rovacraft Sydney, Melbourne or Perth.
    Cheers Baz.

    2011 Discovery 4 SE 2.7L
    1990 Perentie FFR EX Aust Army
    1967 Series IIa 109 (Farm Truck)
    2007 BMW R1200GS
    1979 BMW R80/7
    1983 BMW R100TIC Ex ACT Police
    1994 Yamaha XT225 Serow
    Reply With Quote Reply With Quote
« Hawkeye by Bearmach | OBD-II Scanner »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!