Results 1 to 7 of 7

Thread: Nanocom Graphics analysis

  1. #1
    Join Date
    Apr 2009
    Location
    St.Petersburg, Russia
    Posts
    32
    Total Downloaded
    0

    Nanocom Graphics analysis

    Hello,

    Does anyone try to compare different graphics from Nanocom for the same car but with different tuning (chip, EGR, shnorkel, etc.)?

    It would be useful to have a possibility to compare several logs in a same time or figure out dependences, like speed/air pressure or excessions from normal/typical values.

    Thanks for any ideas!

  2. #2
    Join Date
    Apr 2009
    Location
    St.Petersburg, Russia
    Posts
    32
    Total Downloaded
    0
    Free source code of the Graphic viewer is available there:

    :: Download - Nanocom ::

  3. #3
    Join Date
    Apr 2009
    Location
    St.Petersburg, Russia
    Posts
    32
    Total Downloaded
    0
    We add CSV file export to the Graphic Viewer from Nanocom and extend number of measurements in the graph to the maximum value.
    The program file is attached and you can have a look on it - just place it to the Nanocom Program Files folder.

    http://www.aulro.com/afvb/attachment...1&d=1243323106
    Attached Files Attached Files

  4. #4
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Hi Timka
    Thanks for the post.
    I had missed the graphic viewer download,but seen others display such.Will look into getting it.
    Thanks
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post

  5. #5
    Join Date
    Apr 2009
    Location
    London UK
    Posts
    27
    Total Downloaded
    0
    Guys, in the UK, info on forums about Nanocom is limited to how to switch it on and read fault codes!
    Is it possible that some kind sole could post an idiot guide to Graphics?

    What does it do- what is it for- how can I use it?

    Or is it just for IT experts? Tony

  6. #6
    Join Date
    Apr 2009
    Location
    St.Petersburg, Russia
    Posts
    32
    Total Downloaded
    0
    Quote Originally Posted by discv View Post
    Guys, in the UK, info on forums about Nanocom is limited to how to switch it on and read fault codes!
    Is it possible that some kind sole could post an idiot guide to Graphics?

    What does it do- what is it for- how can I use it?

    Or is it just for IT experts? Tony
    Nanocom is far more than just a fault codes eraser! Check this out:

    :: FAQ - Nanocom ::

    :: Download - Nanocom ::

    :: Download - Nanocom ::

    :: Download - Nanocom ::


    About Graphic viewer: we took the original source codes and add some futures.

    This is a simpe utility to view and export Nanocom fueling logs.

  7. #7
    Join Date
    Apr 2009
    Location
    St.Petersburg, Russia
    Posts
    32
    Total Downloaded
    0
    2.05 version is available, but the Graphic Viewer at least in English version doesn't work at the moment, so you can use mine.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!