Thread: Help! Nanocom has bombed out.

The Nanocom ID is unique to the unit and AFAIK you cant enter or amend it . It would have been provided with the unit and its the one you used to register the device to get the unlock codes. You should be able however to view it . from the SETUP options if you can get there .. to see if its the same as the one you think it is from your registration. I would be inclined to suspect your firmware update probably needs to complete as its in an unstable state , or else and as you are having trouble with the update possible easier , you need to re-apply the firmware that you previously had and was known to work to return it to a working state.

Originally Posted by 23skidoo

The Nanocom ID is unique to the unit and AFAIK you cant enter or amend it . It would have been provided with the unit and its the one you used to register the device to get the unlock codes. You should be able however to view it . from the SETUP options if you can get there .. to see if its the same as the one you think it is from your registration. I would be inclined to suspect your firmware update probably needs to complete as its in an unstable state , or else and as you are having trouble with the update possible easier , you need to re-apply the firmware that you previously had and was known to work to return it to a working state.

Thanks for that, unfortunately it still doesnt let me in. Must be something to do with the ID code. Looks like I will be contacting Italy.
Thanks anyway.

Tony

Has happened to a few of us...

Mine was re-flashed with a program from Italy, but still wont work...

Its on its way back for repair

Landyandy fixed ours, give him a PM.

Baz.

Hi Grumpy
The 3 Ive fixed were all boot failures.
Ive got Mattias programmer.
Contact Mattia first and see if re-programing the boot sector is the issue.If so MORE than happy to do it for you free of charge.You can either post it or come down for a drive(1 1/4hrs from Armadale)
Andrew

Originally Posted by LandyAndy

Hi Grumpy
The 3 Ive fixed were all boot failures.
Ive got Mattias programmer.
Contact Mattia first and see if re-programing the boot sector is the issue.If so MORE than happy to do it for you free of charge.You can either post it or come down for a drive(1 1/4hrs from Armadale)
Andrew

Thanks Andrew,
Sorry for the delay in replying, have been down at Mandurah with 4 grandkids and only got back today.
Williams is just down the road!!
Before I went, I contacted Mattia and have just opened his reply this afternoon. Have now reset every thing including the nanocom's I.D. Could not do this on an external power supply, only through the OBD cable in the vehicle and my wireless laptop??? My problem now is that the Nanocom will not converse with the ECU. Have checked everything out and I am buggered if I can work out why. Might have to pay you a visit and see if you can sort this thing out. Will PM you for details if I need your assistance.
Thanks

Tony

Originally Posted by Grumpy

Thanks Andrew,
Sorry for the delay in replying, have been down at Mandurah with 4 grandkids and only got back today.
Williams is just down the road!!
Before I went, I contacted Mattia and have just opened his reply this afternoon. Have now reset every thing including the nanocom's I.D. Could not do this on an external power supply, only through the OBD cable in the vehicle and my wireless laptop??? My problem now is that the Nanocom will not converse with the ECU. Have checked everything out and I am buggered if I can work out why. Might have to pay you a visit and see if you can sort this thing out. Will PM you for details if I need your assistance.
Thanks

Tony

Mines done exactly the same.....

Guys
Mine does that from time to time.
If its the same problem as mine disconnect the yellow obd cable at the Nannocom end and re-fit whilst nanocom is running.Seems to work for me.
Andrew