Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Injection pumps

  1. #1
    Join Date
    Mar 2009
    Location
    Melton West, Victoria
    Posts
    363
    Total Downloaded
    0

    Injection pumps

    Hi, during my web travels I've found some interesting information on the bosch VP(electronic) and VE(manual) fuel injection pumpts that I thought I'd share - as I wish I'd found some of it earlier myself.

    Bosch part numbers explained
    eg 0 460 404 973 L (my freelander pump)
    eg 0 460 414 xxx VE (disco 300tdi pump)
    V=distributor type pump E=Axial(R would mean radial)
    VE and VP pumps start with digits 0 460 4
    the 6th digit is the plunger size eg 9=9mm,0=10mm,1=11mm
    the 7th digit is the number of cylinders eg 4, 6 or 8 etc
    not sure on the remaining 3 digits but they don't seem important.

    Its possible to convert your VP setup into a VE setup - lots of pros and cons to do this but the choice is there which is nice to know and not too difficult. You'd lose your *drive-by-wire* pump and revert back to a trusty old throttle cable. Also looked fairly simple to upgrade from a standard(for a manual)10mm head to an 11mm or even 12mm. Bigger head = more power (and smoke ?) If you're miles from a testbook dealer and want to service your own pump its worth thinking about imho.

    Think this site has been linked elsewhere here but worth linking again - its a google translation link from a french site showing the innards of the pump in detail.
    Translated version of http://www.forum-auto.com/pole-technique/section12/sujet293129.htm

    Cheers, Clark

  2. #2
    Join Date
    Mar 2009
    Location
    Melton West, Victoria
    Posts
    363
    Total Downloaded
    0

    Exclamation

    Worked out a whole bunch of new info this morning. One part that would seem CRITICAL to me if you're replacing your pump is the pumps direction of rotation - the VE pumps only work in one direction - I don't think it'd get destroyed turning the wrong way, it just wouldn't deliver fuel.

    I'll use my current (broken) Freelander XEDi pump as an example:
    It has 0 460 404 973 L 720 on the side of it - which matches code VE4/10E2100L720 (see table below)

    It turns out the last three digits of the VP37 marry up to another bosch part number that gives more information. The new code breaks down as follows:
    VE = VE type pump (VP is still a VE pump)
    4 = number of cylinders
    /10 = 10mm plunger
    E = electronic governor (F=mechanical)
    xxxx number = governor controlled RPM (I assume this is pump rpm not engine rpm)
    R = clockwise rotation (L = counter clockwise)
    xxx-x number = production number

    So I'm guessing with my Freelander 0460404973L720 that pretty much any of the 0460404 pumps below that have L rotation (counter clockwise) would work, although personally I'd probably choose one with a slightly higher rev limiter if you're intending to up performance. Also going to try an 11mm head in mine sooner or later

    Glad I found this stuff out as I've been ebay bidding on one that rotates the wrong way as it turns out - a 992 from another 2di Rover 825

    I'll list all the 10mm plunger VP37's I've found- haven't seen any VP37's with lower than 961 as the last 3 digits yet.
    0 460 404 961 VE4/10E2250R728-4
    0 460 404 962 VE4/10E2100R701-4
    0 460 404 963 VE4/10E2100L694-1
    0 460 404 964 VE4/10E2250R640-3
    0 460 404 965 VE4/10E2200L736
    0 460 404 966 VE4/10E2250R728
    0 460 404 967 VE4/10E2100R701-3
    0 460 404 969 VE4/10E2075R638-3
    0 460 404 970 VE4/10E2250R590-3
    0 460 404 971 VE4/10E2250R510-3
    0 460 404 972 VE4/10E2100R724
    0 460 404 973 VE4/10E2100L720
    0 460 404 974 VE4/10E2100R715
    0 460 404 975 VE4/10E2100R707
    0 460 404 976 VE4/10E2100R701
    0 460 404 977 VE 4/10 E 2075 R 700
    0 460 404 978 VE4/10E2250R590-2
    0 460 404 979 VE4/10E2075R696
    0 460 404 980 VE4/10E2100L694
    0 460 404 981 VE4/10E2100L688
    0 460 404 982 VE4/10E2250R590-1
    0 460 404 983 VE4/10E2250R530-1
    0 460 404 984 VE4/10E2075R650
    0 460 404 985 VE4/10E2250R510-1
    0 460 404 986 VE4/10E2075R638
    0 460 404 987 VE4/10E2250R640
    0 460 404 988 VE4/10E2100R635
    0 460 404 989 VE 4/10 E 2250 R 600
    0 460 404 990 VE 4/10 E 2250 R 590
    0 460 404 991 VE4/10E2100L585
    0 460 404 992 VE4/10E2250R530
    0 460 404 994 VE 4/10 E 2250 R 510
    0 460 404 995 VE4/10E2250R440-1
    0 460 404 997 VE4/10E2100L450
    0 460 404 998 VE4/10E2250R440

    Clark

  3. #3
    Join Date
    Jan 2007
    Location
    Brisbane
    Posts
    1,368
    Total Downloaded
    0

    Thumbs up

    Thanks for the info Junosi
    06 SE V6 Discovery 3

  4. #4
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,474
    Total Downloaded
    0
    Quote Originally Posted by Junosi View Post
    I'll use my current (broken) Freelander XEDi pump as an example:
    Clark
    What has made you decide that there is actually something wrong with your pump?

    Garry
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  5. #5
    Join Date
    Mar 2009
    Location
    Melton West, Victoria
    Posts
    363
    Total Downloaded
    0
    I took it apart (for fun) it had swarf and other crap in there that I'm sure wasn't meant to be there and a badly scored piston. The hydraulic head/piston wasn't holding pressure. I reckon someone before me has tried to start it with a dry pump maybe - I can't explain the damage otherwise. I'm going to have a crack at rebuilding it myself with a new replacement 11mm head and feed pump for $120 USD and a $24 USD rebuild kit with seals etc in it. Meanwhile I'll get a second hand rep 10mm pump from the UK I think, they're criminally cheap there. I want a spare pump anyways to do some vege oil experiments which is pretty much what I bought the flandy for, well that and some lpg injection experiments. I'm a curious soul.

    Clark

  6. #6
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,474
    Total Downloaded
    0
    You are right - the pumps are really cheap in the UK - though I did miss a good one in Jan in Melbourne for $99.

    Let us know how you go - you do need to ensure the electronics in the pump are Ok though as they can get expensive.

    Garry
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  7. #7
    Join Date
    Nov 2008
    Location
    Brisbane
    Posts
    151
    Total Downloaded
    0
    If my pump is really loud, is it an indicator it is on its way out? when I pull into my garage it is almost louder than the engine! on a td4....

  8. #8
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,474
    Total Downloaded
    0
    Quote Originally Posted by Matplat View Post
    If my pump is really loud, is it an indicator it is on its way out? when I pull into my garage it is almost louder than the engine! on a td4....
    I do not know about TD4s as they are a completely different engine to the L series freelander engine. However as the TD4 is a common rail the pump just has to keep the common rail charged at a high pressure - the ECU controls the injectors - as such it is a much cheaper and simpler pump - just has to deliver high constant pressure.

    I understand that compared to the L series pump - the TD4 pump is less than half the price.

    Garry
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  9. #9
    Join Date
    Nov 2008
    Location
    Brisbane
    Posts
    151
    Total Downloaded
    0
    good to know!

  10. #10
    Join Date
    Mar 2008
    Posts
    174
    Total Downloaded
    0
    Weeellll.... my TD4 pump in the rear died about 8 months ago and they told me $2-2.5k to swap it and the one in the engine bay. Ouch. They could only get the rear one so for a little over $1k I'm on my way.

    Yesterday (yes, in peak hour again) she dies and they tell it's now the one in the engine bay and the charge will be $2500 thanks.. this time just for one pump. What the flip?

    I've had the 2003 TD4 10months and it's gotta go. Trade price is $10k with a working pump or $8k as is... what a drop... they were going for $18k when I bought it.

    The 300TDi never gave me this sort of grief.

    Anyone got any yellow paint? :-)

    Is there a decent pump in Oztralia anywhere under $1k.

    Cheers.

    PS: hope this is an isolated case.

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!