Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Power windows auto up not working after battery disconnect

  1. #1
    freemander Guest

    Power windows auto up not working after battery disconnect

    Hi all, had the battery disconnected after some work yesterday and power windows go auto down fine but no longer go auto up. Is there a way to reset so all windows go auto up and auto down??

  2. #2
    freemander Guest
    Checked the manual and yep, power window reset is in there. All fixed :-)

  3. #3
    Join Date
    Apr 2016
    Location
    Banksia Beach
    Posts
    14
    Total Downloaded
    0
    Hi, sorry bring an old topic up but I can't seem to get it to work. Are there any special things you did such as engine off/on, ignition on/off, doors open or closed. They go down automatically when I unlock the car but won't go up.

    Cheers
    Adam

  4. #4
    Join Date
    Apr 2016
    Location
    Banksia Beach
    Posts
    14
    Total Downloaded
    0
    Just add to this, I'm talking about auto up when locking the car, they auto go down when I unlock but won't go up when I lock the car.

  5. #5
    LRD414's Avatar
    LRD414 is offline Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,727
    Total Downloaded
    0

    Power windows auto up not working after battery disconnect

    If it's the same as a D4, you close window fully, let go and then press and hold up again. You should hear a click and auto up/down will be operational. It is in the owners manual for the D4 so could be also for yours.

    Scott
    D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
    Link to my D4 Build Thread
    D3 2005 V8 Petrol
    Ex '77 RRC 2 door. Long gone but not forgotten.

  6. #6
    Join Date
    Apr 2016
    Location
    Banksia Beach
    Posts
    14
    Total Downloaded
    0
    Ok I've tried every combination possible and still no luck. Just to be clear the Windows go up and down automatically when driving or the ignition is on, and when I unlock the car and hold the unlock button they all go down. The issue I have is the Windows will not close when I lock the car and hold the lock button. Any more ideas would be much appreciated.
    I think I might try and disconnect the battery and start again.

  7. #7
    LRD414's Avatar
    LRD414 is offline Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,727
    Total Downloaded
    0
    Quote Originally Posted by ozzy.adam.9 View Post
    The issue I have is the Windows will not close when I lock the car and hold the lock button. Any more ideas would be much appreciated.
    Ok, that's different to the original poster so I misunderstood. Anyway, I think you're referring to Global Close on locking.
    I have read that this is disabled for Australia. I would assume that would be true for all models. I think in some cars it can be enabled with the right diagnostic equipment.

    Regards,
    Scott
    D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
    Link to my D4 Build Thread
    D3 2005 V8 Petrol
    Ex '77 RRC 2 door. Long gone but not forgotten.

  8. #8
    Join Date
    Apr 2016
    Location
    Banksia Beach
    Posts
    14
    Total Downloaded
    0
    Thanks mate. Yes I've tried everything and it won't work. May be it is disabled for Australia. Just seems strange as global opening works just not global close. Never mind.

  9. #9
    Join Date
    Feb 2009
    Location
    Melbourne
    Posts
    1,198
    Total Downloaded
    0
    Quote Originally Posted by ozzy.adam.9 View Post
    Ok I've tried every combination possible and still no luck. Just to be clear the Windows go up and down automatically when driving or the ignition is on, and when I unlock the car and hold the unlock button they all go down. The issue I have is the Windows will not close when I lock the car and hold the lock button. Any more ideas would be much appreciated.
    I think I might try and disconnect the battery and start again.
    Yeah it's not the one touch up function but rather the global close you're trying to fix? I thought the D4s had to be changed by the dealer to do that?

    Sent from my SM-G900I using AULRO mobile app
    Now 2016 D4 HSE 'Leo' and Steve the Triumph Speed Twin
    Then 2010 D4 3.0 HSE 'James'
    Then 2010 RRS TDV8 'Roger' w traxide DBS, UHF, Cooper Zeons, Superchips remap
    Then 2010 D4 TDV6 'Jumbo' w traxide DBS
    First love 2002 D2 TD5 'Disco Stu'

  10. #10
    Join Date
    Feb 2009
    Location
    Melbourne
    Posts
    1,198
    Total Downloaded
    0
    Quote Originally Posted by ozzy.adam.9 View Post
    Thanks mate. Yes I've tried everything and it won't work. May be it is disabled for Australia. Just seems strange as global opening works just not global close. Never mind.
    Was it working before?

    Sent from my SM-G900I using AULRO mobile app
    Now 2016 D4 HSE 'Leo' and Steve the Triumph Speed Twin
    Then 2010 D4 3.0 HSE 'James'
    Then 2010 RRS TDV8 'Roger' w traxide DBS, UHF, Cooper Zeons, Superchips remap
    Then 2010 D4 TDV6 'Jumbo' w traxide DBS
    First love 2002 D2 TD5 'Disco Stu'

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!