Page 1 of 4 123 ... LastLast
Results 1 to 10 of 32

Thread: What happened to your Freelander 2 today?

  1. #1
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    2,996
    Total Downloaded
    0

    What happened to your Freelander 2 today?

    I thought I's star this thread as now that I own a Freelander 2 I'm going to be quite busy with it over the next few weeks getting the car registered in Victoria.
    So far I have ordered a new rear light assembly as the one on the car is cracked and will fail the roadworthy. I tried to re aim the windscreen washer jets and the needle, as recommended in the owners manual broke inside the jet. I now need to order one of these, part number L2002264. Or could I swap the one on the D2 over? They look the same to me.

    Cheers

    Julian
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2003
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.
    LROCV #1410

  2. #2
    Join Date
    Jan 1970
    Location
    Free Again Thanks Dan
    Posts
    10,148
    Total Downloaded
    0
    Might be a bit lonely here

  3. #3
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    2,996
    Total Downloaded
    0
    Quote Originally Posted by rangieman View Post
    Might be a bit lonely here
    I know, I'm tempted to post in the D2 are and hope the brains trust can help. Like, are the wind screen washer jets interchangeable between the Disco 2 and the Freelander 2? I need one in a hurry to pass the roadworthy!!

    Julian
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2003
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.
    LROCV #1410

  4. #4
    Join Date
    Jan 1970
    Location
    Free Again Thanks Dan
    Posts
    10,148
    Total Downloaded
    0
    Quote Originally Posted by Bohica View Post
    I know, I'm tempted to post in the D2 are and hope the brains trust can help. Like, are the wind screen washer jets interchangeable between the Disco 2 and the Freelander 2? I need one in a hurry to pass the roadworthy!!

    Julian
    Simple try it if you have both cars there

  5. #5
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    2,996
    Total Downloaded
    0

    WIndscreen washer jet

    I picked up the windscreen washer jet from MLR Port Melbourne and installed it on the car. I lost one of the trim clips that hold the acoustic panel onto the bonnet. Some thing else to buy.
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2003
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.
    LROCV #1410

  6. #6
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    2,996
    Total Downloaded
    0

    In for the RWC

    The car has gone in for a road worthy. I know that the rear driver's light will fail. MLR did not get this to Port Melbourne on Saturday. It will arrive today. I'm hoping that every thing else is ok, or easy to fix.

    Cheers

    Julian
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2003
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.
    LROCV #1410

  7. #7
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    2,996
    Total Downloaded
    0

    Front Control Arm Rear Mount Road worthy fail.

    That is what is wrong with the car. How easy is it to replace the rear mount on the front control arm.

    Ta

    Julian
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2003
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.
    LROCV #1410

  8. #8
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    2,996
    Total Downloaded
    0
    Easy fix at $1,000!! it goes ti Vic roads for it;s rego on Friday.
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2003
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.
    LROCV #1410

  9. #9
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    2,996
    Total Downloaded
    0

    Woo hoo Registered in Victoria

    Yes, it's true the car was registered in Victoria this afternoon.
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2003
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.
    LROCV #1410

  10. #10
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    2,996
    Total Downloaded
    0

    Anderson Plug.

    The car has an Anderson plug on the rear on the trailer plug mount. No voltage at the plug! With the engine running or not.
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2003
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.
    LROCV #1410

Page 1 of 4 123 ... LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!