Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: What happened to your Freelander 2 today?

  1. #1
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    1,892

    What happened to your Freelander 2 today?

    I thought I's star this thread as now that I own a Freelander 2 I'm going to be quite busy with it over the next few weeks getting the car registered in Victoria.
    So far I have ordered a new rear light assembly as the one on the car is cracked and will fail the roadworthy. I tried to re aim the windscreen washer jets and the needle, as recommended in the owners manual broke inside the jet. I now need to order one of these, part number L2002264. Or could I swap the one on the D2 over? They look the same to me.

    Cheers

    Julian
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2002
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.

  2. #2
    Join Date
    Jan 1970
    Location
    In my D2a Ripping It Up
    Posts
    10,093
    Might be a bit lonely here
    cheers chris


    My Toy 04 D2a Td5 Manual With Lots of Goodie Goodness
    S111 Swb a work in progress

    Two Wheel Fun Factor
    Triumph Sprint St 955i
    Bultaco Tss 250
    Moto Guzzi 650

  3. #3
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    1,892
    Quote Originally Posted by rangieman View Post
    Might be a bit lonely here
    I know, I'm tempted to post in the D2 are and hope the brains trust can help. Like, are the wind screen washer jets interchangeable between the Disco 2 and the Freelander 2? I need one in a hurry to pass the roadworthy!!

    Julian
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2002
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.

  4. #4
    Join Date
    Jan 1970
    Location
    In my D2a Ripping It Up
    Posts
    10,093
    Quote Originally Posted by Bohica View Post
    I know, I'm tempted to post in the D2 are and hope the brains trust can help. Like, are the wind screen washer jets interchangeable between the Disco 2 and the Freelander 2? I need one in a hurry to pass the roadworthy!!

    Julian
    Simple try it if you have both cars there
    cheers chris


    My Toy 04 D2a Td5 Manual With Lots of Goodie Goodness
    S111 Swb a work in progress

    Two Wheel Fun Factor
    Triumph Sprint St 955i
    Bultaco Tss 250
    Moto Guzzi 650

  5. #5
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    1,892

    WIndscreen washer jet

    I picked up the windscreen washer jet from MLR Port Melbourne and installed it on the car. I lost one of the trim clips that hold the acoustic panel onto the bonnet. Some thing else to buy.
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2002
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.

  6. #6
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    1,892

    In for the RWC

    The car has gone in for a road worthy. I know that the rear driver's light will fail. MLR did not get this to Port Melbourne on Saturday. It will arrive today. I'm hoping that every thing else is ok, or easy to fix.

    Cheers

    Julian
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2002
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.

  7. #7
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    1,892

    Front Control Arm Rear Mount Road worthy fail.

    That is what is wrong with the car. How easy is it to replace the rear mount on the front control arm.

    Ta

    Julian
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2002
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.

  8. #8
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    1,892
    Easy fix at $1,000!! it goes ti Vic roads for it;s rego on Friday.
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2002
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.

  9. #9
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    1,892

    Woo hoo Registered in Victoria

    Yes, it's true the car was registered in Victoria this afternoon.
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2002
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.

  10. #10
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    1,892

    Anderson Plug.

    The car has an Anderson plug on the rear on the trailer plug mount. No voltage at the plug! With the engine running or not.
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2002
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.

Page 1 of 3 123 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!