Results 1 to 4 of 4

Thread: Freelander v6 auto gearbox urgent help needed

  1. #1
    Join Date
    Jul 2015
    Location
    Tanilba bay
    Posts
    4

    Freelander v6 auto gearbox urgent help needed

    I have a 2001 v6 auto freelander doing weird things won't go any higher than 1st or 2nd and then goes into a 4th gear with F-4 flashing in the dash!
    I am looking to take out the gearbox, but can I take it out without removing the engine? Any help would be great

  2. #2
    Join Date
    Oct 2009
    Location
    Hunter Valley
    Posts
    881
    Yes gearbox can be removed with engine still fitted.
    When it flashes F4 it has gone into limp mode and will have logged a fault. Some of the sensors and solenoids can be changed with out gear box removal.
    Have you checked oil level?
    Make sure it is the correct spec for the oil if you add any. Incorrect oil will damage box. The box is a Jatco JF506E
    It doesn't leak oil, Its sweating power

  3. #3
    Join Date
    Jul 2015
    Location
    Tanilba bay
    Posts
    4

    Angry I need help now!

    i was replacing the valve with my hands around it, as I offered it up my finger depressed the gear selector. After putting it back together I now have no reverse 😞 any ideas to help?

  4. #4
    Join Date
    Oct 2009
    Location
    Hunter Valley
    Posts
    881
    Did you remove the torx bolt on the bottom of the box when checking the oil?

    Sent from my GT-I9295 using AULRO mobile app
    It doesn't leak oil, Its sweating power

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!