Results 1 to 5 of 5

Thread: Readywelders

  1. #1
    Join Date
    Aug 2007
    Location
    gold coast
    Posts
    625

    Smile Readywelders

    Hi all, I am the new distributor for READYWELDER in Australia.
    I hope to have 5 units here in the next week or so and will have a demo model for anyone to try out free of charge. I hope to have it all set up in the 130 over the next couple of weeks.
    If you are interested give me a call and I will set up a time.
    I can have it available to use for the welding day with the club also.
    Phil 0423759779
    Attached Images Attached Images

  2. #2
    Join Date
    Jan 1970
    Location
    Piggabeen (Tweed Heads)
    Posts
    2,930

    Readywelder

    hey Phil

    I am assuming that it is a 12v mini mig using a flux cored wire????

    What size battery is the minimum it runs of ie CCA what is the max current or material it can do. I would assume up to about 2.5mm to 3mm.

    I'm keen to have a look and a test.

    Justin

  3. #3
    Join Date
    Aug 2007
    Location
    gold coast
    Posts
    625

    Smile

    here are the specs from the company, i have yet to test it so am looking for willing volunteers to put it thru its paces, i hope to set up a 24 volt and 36 volt system from my truck to test it out and give demos.
    welds steel, stainless, aluminium.
    18volt ok for thin sheet metal,
    24 volt single pass 1/2 inch at 275 amps.
    36 volt welds up to 3/4 inch at 350 to 400 amps.
    welds 22 guage to 3/4 inch.
    wire speeds of 50 to 900 inches per minute.
    if you want to look at all the specs go to Readywelder.com | There's nothing like it!
    it has hose for gas operation as well as flux cored gasless.
    All tips and wire are standard from any welding supplier.

  4. #4
    Join Date
    Aug 2007
    Location
    gold coast
    Posts
    625
    sorry justin got carried away there, not sure of the CCA minimum needed to run the welder so will find out.
    Phil

  5. #5
    Join Date
    Aug 2007
    Location
    gold coast
    Posts
    625

    Thumbs up ATTN DRANGED

    Hey Justin here are a few specs.
    They recommend Deep cycle like OPTIMA Gell cell batteries, or good quality 12dc deep cycle RV or marine battery, and a 10amp overnite charger, regular auto batteries and other batteries not designed for deep cycle discharge will have a shorter life span if drawn too many times.
    so ideal for a dual battery set up.
    A fully charged pair of deep cycle batteries will weld minimum duration of 45 min welding 1/2 inch steel or 3/4 inch alluminium, @ approx 175 amps.
    Lighter duty metal can offer a duration time of 4 hours or more from fully charged batteries.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!