Maxi Lock Front & Rear & LT95 Gearbox - FOR SALE ON OUTER LIMITS

Quote:

---

Originally Posted by aquarangie

I sold my last LT95 for $250 just to get rid of it. As you know there a bloody lump of a gearbox :eek:

Grimace, I would haggle a bit for those Maxi's if you planned on getting them. IMO second hand ones shouldn't be worth more than $1300-1500 an end. Plus fitting them to a later model you'll need to re-mount the actuautor blocks to the housing ($100 for new ones, or re-graft the old ones if possible).

Trav

---

Keh??? just swap in the whole housings:eek:

I bought a 70,000km old 3.5V8 with LT95 for about $800-$850.

Quote:

---

Originally Posted by Slunnie

I bought a 70,000km old 3.5V8 with LT95 for about $800-$850.

---

Probab;y came with a 2 door:D at that price

Sort of. :D

It was out of a Stage 1.

Quote:

---

Originally Posted by rovercare

Keh??? just swap in the whole housings:eek:

---

Doesn't work, I've tried it.

The later Rangie have wider front suspension arms as well as the link to the chassis is bigger as well (86 onwards) Also there's an extra bolt on the swivel probably because the old ones are both undersizer and come loose all the bloody time. I always had issues with that on my 83, even loctite didn't help :eek:

You could make it work, but I prefer the later 'flat' style housing anyway and worth the extra effort to retro-fit them.

Plus IMO those awful drain plugs on the old 2 doors are shocking and are near impossible to undo after a few rock scrapes :mad:

Trav

They all can be retrofitted, but yea its a little dicking around, and yea i've done a few:D

Quote:

---

Originally Posted by rovercare

They all can be retrofitted, but yea its a little dicking around, and yea i've done a few:D

---

Anything is possible, especially on a Rangie and a few beers :twisted: :twisted: :twisted:

Trav

Quote:

---

Originally Posted by aquarangie

I sold my last LT95 for $250 just to get rid of it. As you know there a bloody lump of a gearbox :eek:

Grimace, I would haggle a bit for those Maxi's if you planned on getting them. IMO second hand ones shouldn't be worth more than $1300-1500 an end. Plus fitting them to a later model you'll need to re-mount the actuautor blocks to the housing ($100 for new ones, or re-graft the old ones if possible).

Trav

---

88 and 91 are same model diffs... if they are not the flat bottom housings i wont be interetsed at all and yes i will not pay 3400.

Quote:

---

Originally Posted by Grimace

88 and 91 are same model diffs... if they are not the flat bottom housings i wont be interetsed at all and yes i will not pay 3400.

---

Yes I forgot, he has built up a 4 door Rangie ute and had the maxi's in that (i think it was a 88 model) so disregard the last couple of comments.

Personally, I think $2500-2800 is a fair price for the pair complete.

Trav