For around $250, you can get a full kit of superpro from the UK, this will do all bushes in the front and rear (upper & lower) arms, and panhard.:)
Printable View
For around $250, you can get a full kit of superpro from the UK, this will do all bushes in the front and rear (upper & lower) arms, and panhard.:)
for some reason I thought they were an Aussie made and owned????Quote:
Originally Posted by Vern
They are aren't theyQuote:
Originally Posted by uninformed
I know Bearmach get there Super pro form the factory in Brisbane
I know this because I took 4 sets of d2 maxi drive axels over to the factory to be put in the container of Super Pro set for Bearmach . These shafts were for the Bearmach racing cars , and done as a favor for the owner of Bearmach
They are an Aussie product, just like safari, and ARB, but much cheaper to source from O/S. But lets please keep the thread on topic:)
Quote:
Originally Posted by Vern
As above - Yes they are!!! But despite the carbon needed to transport them OS and then back again, the reason they are more expensive to buy locally will be sure to be blamed on the carbon tax in a few months time ;)Quote:
Originally Posted by uninformed
X 5 Super pro
check bush length,county should be 48mm-SPF0126K
defender 54mm-SPF0195K
hope these part numbers are correct.
Jim
BTW, there are two different versions for the chassis end of the front radius arms, one looks like a standard LR set, the other has bevelled edges and one of the bushes has a peripheral groove to allow more flex in the bush.
http://www.aulro.com/afvb/attachment...1&d=1333482333
http://www.aulro.com/afvb/attachment...1&d=1333482333
Rick, are the same size for the same RA? or are they different, one for the early RA and one for the later, wider type RA?
Don't know Serg, you'd have to look in the cattle dog.
Thanks guys great help :)
I was considering running standard rubber ones at chassis end and superpro at diff end ?? Anyone looked into the haultech bushes again ? Or where to get them from ?