sourcing bushes

Quote:

---

Originally Posted by c.h.i.e.f

Thanks guys great help :)
I was considering running standard rubber ones at chassis end and superpro at diff end ??

---

NOOOOOOOO - that is what I did - you will regret it (I did).

See the pics of my bushes I posted in the P38 bush thread. [ EDIT - now see below]

As for haultech bushes, I don't think they are making them anymore - but contact haulech direct and ask. Icepack - Haultech Engineering

EDIT - cut and paste from other post:

Quote:

---

Originally Posted by isuzurover

Hmm - FWIW, I bought "OEM standard, made to the original standard by the Original Equipment Manufacturer" bushes for my 110 from a very reputable supplier. The first one failed after ~1000 km of the CSR, the rest were fubar by the time I got back home. That was what made me go all super-pro.

Radius arm bush with <1000 road km and <1000 km of the CSR on it:
https://www.aulro.com/afvb/

Trailing arm bush (<10000 km):
https://www.aulro.com/afvb/images/im...013/12/256.jpg

---

Thanks for the heads up ...So best to change the chassis end to superpro at the same time ? I got quoted $100 for the both sides diff end

Looks like I'll be going superpro all round if I cannot get hold of haultech tomorrow then... My chassis end bushes are in good order however the trailing arm chassis end are probably worse than that and I have bent the arms at the chassis end by having to much flex and not enough mods...

Order them from the UK, much much cheaper:)

But from where? I'm not having much luck searching my usual suppliers so far. Devon 4x4, (I haven't used them before), have them.

Quote:

---

Originally Posted by c.h.i.e.f

Super pro sound like the goods... I was told by someone that the original bushes will set me back close to $200 I then thought to myself he must have been screwed over :eek:

---

It's those sort of stupid prices given maybe by one local supplier that causes every one to run to England. Check a few other local places and get a proper price and keep the $ in Oz.

Quote:

---

Originally Posted by It'sNotWorthComplaining!

It's those sort of stupid prices given maybe by one local supplier that causes every one to run to England. Check a few other local places and get a proper price and keep the $ in Oz.

---

Surely it is better for the economy to buy an Australian Made product (SuperPro) overseas than buy an imported product (oe rubber shlock) locally???

The former helps keep BOTH local manufacturing and the balance of trade afloat. The latter just gives money to local wholesalers and retailers.

Quote:

---

Originally Posted by It'sNotWorthComplaining!

It's those sort of stupid prices given maybe by one local supplier that causes every one to run to England. Check a few other local places and get a proper price and keep the $ in Oz.

---

If you can find me a full kit for around $250 in Australia, i'll buy them from there.

I would like to buy in australia but what Ben said makes perfect sense so if in the end it is more beneficial to buy overseas and this item being Australian too I'll do what's best for my pocket....

Quote:

---

Originally Posted by Davo

But from where? I'm not having much luck searching my usual suppliers so far. Devon 4x4, (I haven't used them before), have them.

---

Devon is 181 quid for my POS. Same kit at Paddocks 129 quid ($199 ish) :cool: :

KIT0042K | SuperPro Polyurethane Bush Kit - Range Rover Classic to 1985 - pre EFI

cheers, DL